PDA

View Full Version : My Garage !!


Z-as in Zorglup
2004.04.08, 07:51 PM
Heyy !!
Here is a view of my cars !! I have 2 FET-tuned and 3 x-speed class !!
I have a car more, but one of my friends have it for loan !! It's a Mazda RX !!
Just that !!

Z-as in Zorglup
2004.04.09, 04:15 PM
Heyy !!
Here is a 'family-pic' !!
My NSX's are FET-modified(2X4) !! And running approximate 30km/t with smallest pinion(6t) !!But reach top-speed in a split-second !!

TNB
2004.04.10, 12:12 AM
I like the Loctite body and of course, your chrome NSX looks a lot better than my chrome NSX body. "Chop, chop, whack, whack, buzzz"--the sound of a Dremel, a little modification, and a little bashing. ;)

Z-as in Zorglup
2004.04.10, 09:06 AM
Heyy !!
If you look at my first posted pic's, you'll see that I use 02RM motormount for my 01Loctite !! That allow me too lower it a lot !! And still use my top-damper (also 02) !! It' one of my best car's ! I have experimenting with mm set-up's as well, but i'm a bit afraid of 'The Dremler' !! So can't make one before I get a extra body!! (It's on the way) !! :)
Just that !!

TNB
2004.04.11, 01:21 AM
I only use the Dremel because I want to get my monies worth. :) Actually, the Dremel tool was one of the very first things I bought when I got into R/C.

Z-as in Zorglup
2004.04.28, 08:21 AM
Heyy !!
Some new pic's of my loctite !!
Notice the Atomic-motor !! It kick some butt's !! :cool:

arch2b
2004.04.28, 08:30 AM
which motor do you have? i have the atomic modified motor (turbo) and it's very fast. i have to REALLY gear down the car just so i can control it. i run it with a 2x2 7xxx fet stack

Z-as in Zorglup
2004.04.28, 09:01 AM
Heyy !!
Its a AR18 !! I have 2X4 FET's onboard, and it blow's my rubber-tires off with the 9 pinion !! Guess I have to glue them on !! :)

audisten
2004.04.28, 11:36 AM
Hey Z
How much did you pay for that atomic AR18 motor, and where did you buy it??

På Dansk:
Hvor meget gav du for motoren og hvor købte du den :D

Evo
2004.04.28, 11:54 AM
www.gamesweb.dk 329 dkr

Z-as in Zorglup
2004.04.28, 01:10 PM
Heyy !!
Jepper !! Games !! :D

Z-as in Zorglup
2004.05.26, 07:15 PM
Heyy !!
Here som new pic's of my cars !!

GucciPiggy
2004.05.26, 07:37 PM
Very impressive collection. To get four cars in that state of tune over here in Australia I am looking at at least $2000 :( Your lucky.

PAULANGELO
2004.05.27, 09:03 AM
Nice table ;)

Z-as in Zorglup
2004.05.27, 10:48 AM
Heyy !!
Thank's !! :)
Here's a list over parts in use :
Honda G'ZOX:
Chassis MR02RM
Pinion 9
Spur/Crown 42
Gear Ratio 4.667
Front Tire foam
Width 8.5 mm
Rear Tire foam
Width 11 mm
Notes: FETTET 2x4, Atomic T2
2€ Camber 1€ Toe-out
Alu-parts : Motor-mount, Ball-diff, Bulk-head, Knuckles, Tie rod, Top-damper+mounts, Lower-set, Batteri-clips, Alu-rims

Honda LOCTITE:
Chassis MR01RM
Pinion 9
Spur/Crown 42
Gear Ratio 4.667
Front Tire foam
Width 8.5 mm
Rear Tire foam
Width 11 mm
Notes: FETTET 2x4, Atomic T1
1€ camber Toe in
Alu : Motor-mount, Ball-diff, Motor-cooler, Bulk-head, Knuckles, Tie rod, H-plate (soft steel), Batteri-clips, Top-damper, Alu-rims

Honda Castrol:
Chassis MR01RM
Pinion 7
Spur/Crown 42
Gear Ratio 6.000
Front Tire foam
Width 8.5 mm
Rear Tire foam
Width 11 mm
Notes: Standard ESC, Turbo GPM V2, PN S03
0€ Camber Toe-in
Alu-parts : Motor-mount, Ball-diff, Bulk-head, Knuckles, Tie rod, H-plate (soft steel), Alu-rims
02RM top-damper

Enzo :
Chassis MR02MM
Pinion 7
Spur/Crown 42
Gear Ratio 6.000
Front Tire foam
Width 8.5 mm
Rear Tire foam
Width 11 mm
Notes: Standard ESC, Blue Power motor
1€ Camber Toe in
Alu : Motor-mount, Ball-diff, Bulk-head, Knuckles, Tie rod, Batteri-clips, Lower-set, Karosse-clips (front), Alu-rims
Atomic-damper

Mercedes CLK(Warsteiner) :
Chassis MR02MM
Pinion 9
Spur/Crown 42
Gear Ratio 4.667
Front Tire foam
Width 8.5 mm
Rear Tire foam
Width 11 mm
Notes: FETTET 2X3, 35T motor(minizworkshop)
1€ Camber Toe out
Alu : Motor-mount, Ball-diff, Knuckles, Tie rod, Lower-set,top-damper+mounts, Alu-rims

ChiefGreenLeaf
2004.06.11, 02:17 AM
Nice table ;)
I second that!!!!

ChiefGreenLeaf
2004.06.11, 02:23 AM
Oh yah nice chassis's to,sorry got distracted :D

Z-as in Zorglup
2004.06.30, 11:08 AM
Heyy !!
Have opdated my parts-list !! and soon there will be new pic's of my new cars !! :D
Atomic's T2 is a wild motherf***** !! It's on my 2x4 FET car and it's really amazing !!

arch2b
2004.06.30, 12:12 PM
what is your run time like? i get about 20 minutes with my atomic modified motor and 2x4 7xxx fets

Z-as in Zorglup
2004.06.30, 01:53 PM
Heyy !!
Runtime is 2X10-12 min. with Atomic-motor !! But I use to shift batts after 10-12 min. (a race!!) !! It can run twice, but annoying if they run out of power 1-2 min to finish !! ;)

Z-as in Zorglup
2004.10.05, 06:01 PM
Heyy !!
Here is some new pic's !! I got some Atomic motors since !! A Z2 and another T2 !! :) I just love these motors !! ;)
First time I ran the Z2 against my friend, he just stop after a while and ask me WHAT I had done to my car !! He He !!
I also have a pair of these Atomic Stock motors !! GOOD motors :)
But to pic's !!

pchan0
2004.10.05, 06:12 PM
Where did you get those Power foams?

Z-as in Zorglup
2004.10.05, 06:47 PM
Where did you get those Power foams?
Heyy !!
Here !! In Denmark !!
Why ?

Ninja
2004.10.05, 08:02 PM
Heyy !!
Its a AR18 !! I have 2X4 FET's onboard, and it blow's my rubber-tires off with the 9 pinion !! Guess I have to glue them on !! :)
i have a 2x4 fet stack on my 01, with my X-Speed Pro and a 7 tooth pinion it will blow both back wheels off :D and mine had PN double sided tape on them :eek:

Twenty-Se7en
2004.10.05, 10:05 PM
great pics :)

Z-as in Zorglup
2004.10.06, 12:46 PM
great pics :)
Heyy !!
Thanks !!
here is a pic of almost all my cars !!(one of my friends has borrow a car !!)

PAULANGELO
2004.10.06, 01:59 PM
that is one impressive stable

Z-as in Zorglup
2004.10.06, 05:00 PM
that is one impressive stable
Heyy !!
Thanks !!
I have seen your album !! It's impressiv too !!
How many car's do you have ?

PAULANGELO
2004.10.06, 07:45 PM
How many? lets see, I have 2 F1's setup as the CP Cup cars, 3 overlands, one MR02 Enzo, one Monster (with a Pajero Ol body and external turbo) and 3 plus MR01's. I say plus because I have all the parts to make another. (actually, it really doesn't need to be a MR01 ;) )

Hardtrukr
2004.10.06, 08:16 PM
Well, I have one MR01, got rid of my MR02, and have a busted Monster (fet's...). So I'm very, eh, slim on cars lol. But my MR01 is decked! Check it out in the PIU album, the one with the MZ353 shocks and red viper.

Z-as in Zorglup, how do you like your MZ353 shocks? I love mine, although they are heavy... :o

Z-as in Zorglup
2004.10.07, 08:37 AM
Well, I have one MR01, got rid of my MR02, and have a busted Monster (fet's...). So I'm very, eh, slim on cars lol. But my MR01 is decked! Check it out in the PIU album, the one with the MZ353 shocks and red viper.

Z-as in Zorglup, how do you like your MZ353 shocks? I love mine, although they are heavy... :o
Heyy !!
Is it this, you ask about ?
If so !! I'm very pleased with it !!

Hardtrukr
2004.10.07, 02:05 PM
Heyy !!
Is it this, you ask about ?
If so !! I'm very pleased with it !!

Yeah, thats the shocks! They work so nice, and are very smooth... :)

Z-as in Zorglup
2004.11.07, 10:57 AM
heyy !!
News !! I got my hands on a OL 40 th model !!
And in a deal with a buddy of mine, I got this 01'er(kyosho) with a Iweaver GT 40 body !!

davisdavis
2004.11.07, 11:57 AM
can u show us what's underneath the body~ ?
people are always interested in that. :rolleyes:

pchan0
2004.11.07, 12:07 PM
heyy !!
News !! I got my hands on a OL 40 th model !!
And in a deal with a buddy of mine, I got this 01'er(kyosho) with a Iweaver GT 40 body !!

What track surface do you race on? How do you like those power foams? What hardness do you use?

Z-as in Zorglup
2004.11.07, 05:09 PM
Heyy !!
What track surface do you race on? How do you like those power foams? What hardness do you use?

I race on both wood-floor and RCP !! I like them alot !! ;)
On wood I use squat's friction-fluid and nothing on RCP !! :)
Rear : Soft....... Front : Medium
I have also some foam-tires called 'Insane', Some 'make them youself' foamtires, glue and cut, they are even better !! :D
Davisdavis>> Pic's will be posted !! It's have a 2X3 fet-upgrade and a 28t from miniz-workshop !! :)

pchan0
2004.11.07, 07:05 PM
Sweet, I ordered a set of front medium and rear soft. If I like them I will order all they have. :D

Z-as in Zorglup
2005.01.20, 04:09 PM
Heyy !!
I have a lot new stuff, but the best is this : One of my friends is painter, and he is started painting some of my cars !! At start I was a bit sceptical of it, but it look really great !! There is a pic of his first work att.

Z-as in Zorglup
2005.02.07, 08:42 AM
Heyy !!
NSX + sculls ?? Here it is !! :cool:

lfisminiz
2005.02.07, 06:45 PM
Very nice wild looking body. I like it. Like to see different paint jobs.

Roger
2005.02.07, 07:08 PM
Z: Nice collection you have there. I like the photos of all your chassis. Awesome !!!!

kurtmeyer69
2005.02.10, 01:09 PM
Very Nice Bodies....k

williams F1#3
2005.03.16, 04:06 PM
heyy!!

stop saying heyy!! it has me screaming whenevr i read ur posts
bty, very nice paint on the enzo and nsx

saiyan
2005.04.02, 08:04 PM
I have to say that NSX body with skulls on it is :D smokin! That is pretty trick. He used a good quantity of clear on it giving it some depth.

Roger
2005.04.02, 08:44 PM
heyy !!! Nice collection. I also like the table :)

Z-as in Zorglup
2005.04.03, 06:31 AM
Heyy !!
heyy !!! Nice collection. I also like the table :)
Thanks !! :) Your collection is impressiv too ! I was looking in your gallery ;)
@Saiyan>> Yep !! Lots of clear !!
But I have to make some new pic's ! I have a lot of new stuff, so more to come !! :D

saiyan
2005.04.07, 01:30 AM
Yeah i really like that NSX w/ skulls Paint job. I could see SPAWN himself gettin in and rippin a few hot laps in it!! :D

Flexness
2005.08.12, 10:34 AM
show me more pics off the monster. and chassi ;)

Z-as in Zorglup
2005.08.15, 01:28 PM
Heyy !
show me more pics off the monster. and chassi ;)

It's sold ! ;)

Z-as in Zorglup
2005.08.24, 11:13 AM
Hey !
Two 'new' cars ! ;)

Lionblade
2005.08.24, 12:34 PM
I knew I wasn't the only one who bought a black SLR ASC! :D

See, I think the black looks much better than silver on the SLR...I'm so sick of silver Z's. I don't think the Tagus look good with this body, though..I like the original wheels. Maybe blackfacing them would make it ultimate stealth for RCP..hm.

Have you run the SLR yet? How do you like the handling? Compared to my Enzo, this ASC cuts a little bit easier to me, but isn't nearly as stable. Also, the mirrors and headlights come out too easy, and the body has the tendecy to pop off rather easily..

Though I must say, I laugh when someone says, "Where the hell are you? I can't see that damn car!" --Actual quote by Tom Price of ARCMS. :D

Z-as in Zorglup
2005.08.24, 04:47 PM
Heyy !
@>Lionblade
No ! I haven't raced it yet, but it's ready ! ;)
I'm use to race my NSX's !! :D (Team Mugen) :cool:

will3kgt
2005.09.03, 05:16 AM
You have two more NSXs than I do.

Z-as in Zorglup
2005.09.03, 08:59 AM
Heyy !
You have two more NSXs than I do.

LooL :D
;)
We (www.aalborgmini-z.dk) got our fingers, on some of that regupol rubbersurface they use in Sweden and Norway !! Exellent grib and very smooth to drive on. :)

Juggler
2005.09.11, 11:50 AM
Heyy !!
Its a AR18 !! I have 2X4 FET's onboard, and it blow's my rubber-tires off with the 9 pinion !! Guess I have to glue them on !! :)


Does anyone know if Atomic T2 motor(AR18A) is ok with 2x2 4562 fet stack?!
If someone knows please let me know!!!Thanks in advance!

Z-as in Zorglup
2005.09.11, 01:23 PM
Heyy !
Does anyone know if Atomic T2 motor(AR18A) is ok with 2x2 4562 fet stack?!
If someone knows please let me know!!!Thanks in advance!

If you stick to 7/8 pinion it will be ok, but not higher ! ;)
(safe mode) :)

Juggler
2005.09.12, 12:10 AM
Thanks!!!I hope i'll catch you online someday in msn!I have some things to ask you!

MiniZMaster
2005.09.28, 06:42 PM
nice cars, i will run them over with my OL thought hehehe

Z-as in Zorglup
2005.12.15, 08:19 AM
Hey !
New paintjob on a NSX ! :)
More pic's linked in my signatur-line.

lfisminiz
2005.12.15, 08:34 PM
Nice job!!!!!!Looks sweet.

ZYHAC
2006.03.14, 08:03 AM
Hey !
New paintjob on a NSX ! :)
More pic's linked in my signatur-line.


Nice pics. Did you use a wider wheel base? I am just wondering cause your tires looks wider that the normal 01/02 tires.

gohjon
2006.03.15, 08:39 PM
lolx....how much hav u spend on miniz already????ahahz u got so "much"

Z-as in Zorglup
2006.03.17, 06:44 PM
Hey !
@>>ZYHAC> No. I used to use 'Gandini powertires' and use wide wheels, all around on my 01's(And AWD). Now we make our own foam's with a tire-truer, using Inzane-foam or Gandini-foam.
@>>gohjon> A LOT !! :D
Some new pic's !

joshsrchobbies
2006.03.18, 12:06 PM
Those are some nice car's and bodys you have there . There all sweet!!

Josh

gohjon
2006.03.18, 09:26 PM
lolx...a street punk doing things on a professional jgtc car.....hahaz tats cute

HammerZ
2006.03.19, 04:03 AM
Nice F150's, love the slammed red one.

Z-as in Zorglup
2006.03.20, 08:30 AM
Hey !
lolx...a street punk doing things on a professional jgtc car.....hahaz tats cute
Illegal intruder ! Painting his tag, all over my cars ! :eek:
;)

Z-as in Zorglup
2006.09.22, 02:27 PM
Yo !
I have been sick of mini-z, ever since we compited in a Le man, for almost a half year ago.
24 hour. 3 Drivers on each team. 6 Team's. It was pure hell. One of our teammember get sick and a in-last-minut-reserve, was a very bad driver ! He smack our car in pieces 2 times. once in the warm-up and again in the middle of the night. So I had 2 complet build-ups of the car around the esc. (He luckyly did'nt manage, to smack the esc. The car was difine by the esc, so we was able to repair it.) So we started from pit-area and then it just went worse. :( Do I have to tell, that I was in a bad mood, after that experience ? ;) ( I did'nt drive a Z for 3 month ) (Whitch is the longest stop ever.) :eek:
But I'm back ! :D
Some pic's of our new track, made of regupol. ;)
Ps. Why can't I edit my old posts ?

Z-as in Zorglup
2006.09.22, 04:59 PM
Hey !
Trust me ! We still blaming him ! :D
;)

dean
2006.09.22, 09:56 PM
Great track!!!

What size is that?

Nice job ...looks like it would make a great Epoch track too. ;)

Z-as in Zorglup
2006.09.23, 08:30 AM
Hey !
It's 3.60 X 6 meters.
Regupol is very smooth to drive on. ;)

DeOz
2007.09.12, 12:53 PM
Nice collection :)

Neomax
2008.02.28, 05:35 AM
Nice collection you got there mate! i have about 8 cars myself, cant keep up with what i get...lol
But why do you run so many MR-01s? i have one and find it very twitchy and unstable, i have tried to play with settings and different setups, but i kinda think why bother? a stock MR-02 runs waaayyyy better out of the box than an upgraded MR-01!