PDA

View Full Version : PN two-sided tape


Aaronnn
2004.09.17, 09:16 PM
it finally got around to testing this double sided tape from PN....
this stuff should go on the must have list if you are running front 8deg

Ninja
2004.09.17, 09:20 PM
where did you get it?

pHREDD
2004.09.17, 09:21 PM
I jut got in a couple of rolls today....havent had a chance to test it yet.

Aaronnn
2004.09.17, 09:22 PM
http://www.pnracing.com/

Ninja
2004.09.17, 09:22 PM
sweet pHREDD you gonna hook me up with a little of that when i get my new tires and wheels in?

pHREDD
2004.09.17, 09:23 PM
where did you get it?


rcKenon.....

Aaronnn
2004.09.17, 09:24 PM
p.s. i ran four sets of front 8deg and not once any came off...
unlike before, i was having them come off after half wear...

pHREDD
2004.09.17, 09:24 PM
sweet pHREDD you gonna hook me up with a little of that when i get my new tires and wheels in?


i am gonna tape...i mean hook everybody up :D ....i hate us loosing tires all the time.

Ninja
2004.09.17, 09:25 PM
yeah and i hate using glue. it uglies up the wheels if it spreads too much :(

pHREDD
2004.09.17, 09:26 PM
p.s. i ran four sets of front 8deg and not once any came off...
unlike before, i was having them come off after half wear...

I know what you mean...run 3 laps, put a tire back on. it was getting on my nerves

Aaronnn
2004.09.17, 09:30 PM
this is a bit obvious...but dont touch the tape and ruin the sticky factor...

arch2b
2004.09.17, 10:55 PM
this is a bit obvious...but dont touch the tape and ruin the sticky factor...
:D it would seem obvious wouldn't it :p i tape my tires.... works like a charm. why mess with glue when tape is removable?

TNB
2004.09.18, 01:50 AM
:D it would seem obvious wouldn't it :p i tape my tires.... works like a charm. why mess with glue when tape is removable?
A different car but I tried taping the tires on my M18. It didn't work. I used CA and it worked for a run. Then I reglued the tires to the wheels and ran the R/C again. Tonight I tried premounted foams, but the wheels came off. Now the wheels have spots of CA to hold them to the hubs. And the last run, the tires and wheels both stayed on. However, I did notice the spur gear was getting a little hot--not quite to the melting point but there was a smell in the air. It's simply a crazy fast R/C and I probably haven't held WOT for more than a second. I guess if I ever build such a crazy fast Z, CA may be required too. :rolleyes:

mini-z
2004.09.18, 10:54 AM
Got a make and part number for this? I assume it's just off-the-shelf tape of some sort?

Maximo
2004.09.21, 07:49 PM
:D it would seem obvious wouldn't it :p i tape my tires.... works like a charm. why mess with glue when tape is removable?

I tried the PN Racing tape works ok in stock mod class but it does not work in
Fet class or Outlaw... tire peals right off under acelleration. :eek:

Peace :)