PDA

View Full Version : Wheel Question


riceinator
2004.12.16, 10:14 PM
hi guys,

i recently purchased my miniz. i have a model kit that has some really nice rims that are perfect size. i was wondering if it would be possible to drill a hole through the middle so it is the same size as the stock wheels and if it would werk. i just want to know this before i try this and find out it doesn't werk and waste perfectly good rims. there are pics of it in my gallery, the link to my gallery is in my sig.



thanks, rice

byebye
2004.12.16, 10:22 PM
If you look at the stock wheels they have a nylon bearing that needs to be there for the wheel to spin freely. I don't think you would have good results. They sell alloy for a decent price and the plastics are always very cheap.

riceinator
2004.12.16, 10:26 PM
If you look at the stock wheels they have a nylon bearing that needs to be there for the wheel to spin freely. I don't think you would have good results. They sell alloy for a decent price and the plastics are always very cheap.


ok thanks for your feedback.