PDA

View Full Version : Vital Statistics


arch2b
2005.03.18, 10:45 PM
Everyone wants a better shop, Mini-z is comitted to developing one. We are asking for member participation in the collection of vital statistics for every mini-z.

with the recent purchase of the mustang autoscale, i noticed for the first time kyosho is providing post card sized pamphlets with the vital statistics for that autoscale. as this is a new feature, we would like to apply it retroactively to all the previous autoscales as we believe this information will be of great benifit to anyone who ever searched the shop.

in the interest of being as brief and to the point we have reduced the amount of information to the following:

(filled in for example)
ASC part number(s): MZG205MB / MZG205MG
RTR part number(s): 30461
Type of chassis: MR-02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH215S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 1mm
Front chassis width: 70mm
Rear chassis width: 72mm
Receiver antenna D size: 30mm


if you have require clarification on what we are asking for, i have attached the card that was supplied with my mustang as an example.

if you received one of these cards with your readyset or autoscale, please post this information.

if your really bored, you can find alot of this information in existing documents such as your manual, autoscale pamphlets and kyosho pdf's you can download such as the wheel chart.

the more submissions we have, the better you and others will be informed whe searching the shop.

PLEASE, only post this info.

HammerZ
2005.03.20, 06:31 AM
I did one for the Lancia Stratos, because it is somewhat unusual. There are a few N/A's in the listing, and added the motor position to the list. I am suprised it is listed as low. I also made the list into a text file template that can be used to fill out.


Lancia Stratos

ASC part number(s): MZC16MC/ MZC16SR
RTR part number(s): 30134
Type of chassis: MR01
Wheelbase: S
Motor mount position: Low
Suspension limiter: N/A
Wheel set part number: MZ26
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 15mm

HammerZ
2005.03.20, 09:19 AM
I didn't list the limiter, because the 01 don't have them. The width I riffled through five different sheets and did not find that listed anyplace. If I had to guess, I'd say front 65mm, rear 70mm.

HammerZ
2005.03.20, 09:49 AM
I guessed on the chassis width again. These two had the cards with them. I am still looking for others.

Lotus Europa.

ASC part number(s): MZG40G/ MZG40BK/ MZG40CW
RTR part number(s): 30358
Type of chassis: MR01F
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZH104C
Tire set part number: MZT100C-F
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 20mm


McLaren F1

ASC part number(s): MZG203
RTR part number(s): 30457
Type of chassis: MR02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH213
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: 70mm
Rear chassis width: 70mm
Receiver antenna D size: 5mm

HammerZ
2005.03.20, 10:21 AM
This one I used a sheet from my white body set. There are some holes in this.

R32 Skyline GT-R

ASC part number(s): MZB23
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: L
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ40/ MZ41GM
Front wheel width: N
Front wheel offset: 1.5mm
Rear wheel width: W
Rear wheel offset: -1mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 35mm


Ferrari F40

ASC part number(s): MZB19
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: M
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ30
Front wheel width: N
Front wheel offset: 2.5mm
Rear wheel width: W
Rear wheel offset: 2mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 20mm

arch2b
2005.03.20, 10:31 AM
thanks for your efforts hammer. i guess not to many others have the time or inclination to contribute. :confused:

obviously not all the info can or could be found on some of these so there enevitabley be some holes but over time i'm sure they will be filled.

motor position is applicable to mr-01's which are no longer marketed by kyosho. the move to the mr-015 eliminates the need for motor position execpt for those very few mr-01's that require the high mount which can be noted by whomever posts the info.

ok, we can't let hammer get them all can we ;) :p there are tons of bodies nad tons of members.... if we could even get each to do just one we would have them all very quickly. ofcourse those like hammer make it much easier :cool: please contribute :) and other than my ramblings, lets keep the posting applicable to the information, follow hammer's example :cool:

HammerZ
2005.03.20, 10:47 AM
The Lancia body is one of those that has you wondering if you need the pod high or low. According to the listings it said low. It has to be by far the tightest Kyosho body I have seen for a Mini Z chassis. If it helps out with the shop listings, I am behind it %110.

Ninja
2005.03.20, 01:27 PM
i dont know if you guys wanted OL's to be listed here or not, but here is the info for the ones i have seen info for, i will get around to posting the ones for my racers once i find the books on them.

Body Name MITSUBISHI PAJERO

ASC part number(s): MVC1HM(#201), MVC1JK(#200), MVG5W(STREET WHITE), MVG5R(STREET RED)
RTR part number(s): 30261HM(#201), 30261JK(#200), 30265W(WHITE), 30265R(RED)
Type of chassis: OL
Wheelbase: B1
Suspension limiter:
Wheel set part number: MVHO1(WHITE), MVHO1AM(ALUMINUM), MVHO1CM(CHROME), MVH03(STREET)
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 13MM

Body Name BMW X5

ASC part number(s): MVG3S(SILVER), MVG3MB(METALLIC BLUE)
RTR part number(s): 30263S(SILVER), 30263MB(METALLIC BLUE)
Type of chassis: OL
Wheelbase: B2
Suspension limiter:
Wheel set part number: MVHO4
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 17MM

Body Name TOYOTA LAND CRUISER

ASC part number(s): MVC2JR(#239), NVC2S(SILVER), MVC2PW(WHITE)
RTR part number(s): 30262JR(#239), 30262S(SILVER), 30262PW(WHITE)
Type of chassis: OL
Wheelbase: B2
Suspension limiter:
Wheel set part number: MVH02R(RED), MVHO2AM(ALUMINUM), MVHO2CM(CHROME)
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 17MM

arch2b
2005.03.20, 02:59 PM
we are asking for submissions for ALL mini-z's ;)

thanks for your help ninja :D between the two of you we should get a nice chunk of them out of the way :cool: i really appreciate the effort

lfisminiz
2005.03.20, 09:27 PM
Ill have to do some digging. All the bodies i get i ussually throw that stuff. I guess i should check it out better.

arch2b
2005.03.20, 09:30 PM
Ill have to do some digging. All the bodies i get i ussually throw that stuff. I guess i should check it out better.
i've tossed all mine too, thus the reqest for submissions ;)

HammerZ
2005.03.20, 09:54 PM
The funny thing is earlier I was looking for the stats on the Diablo, the papers that came with it it didn't even have it listed (it listed the McLaren). I would have had it listed here too.

The part numbers on the F40 and R32 above is the white body sets, so they need the right ASC numbers.

HammerZ
2005.03.21, 01:36 PM
Two more older ones that I found stuff on. I figure incase there is a rerelease of these. I wished I can go back and edit the others, to add numbers and such. Cross referance it with the wheel chart, some of these may have more than two/ three part numbers for them.

Nissan Skyline R34 GT-R V Spec

ASC part number(s):
RTR part number(s): 30931S/ 30931MB/ 30931R
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ13/ MZ13C/ MZ13GM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm

Honda S2000

ASC part number(s): MZC8
RTR part number(s):
Type of chassis:MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ22
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 23.5mm

arch2b
2005.03.21, 01:59 PM
go ahead and post the information as updates (only the updated info) and i'll see abnout getting the edit feature fixed :p

HammerZ
2005.03.21, 02:31 PM
Some more of the old MR01 cars. I found these mucking through some old PDF files on my system.


Mitsubishi Lancer Evo. VI

ASC part number(s): MZC3
RTR part number(s):30041R/ 30041S/ 30041W
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ15/ MZ15CM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Subaru Impreza WRX

ASC part number(s): MZC2
RTR part number(s): 30932BK/ 30932MB/30932Y/ 30932W
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ14GL
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


BMW Z8

ASC part number(s): MZC4
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ16
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Audi TT

ASC part number(s): MZC5
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ17
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 15mm


Porsche 911 GT3

ASC part number(s): MZC6
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ21
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Dodge Viper GTS-R

ASC part number(s): MZC7
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ20
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 35mm

HammerZ
2005.03.21, 02:53 PM
Here are the PDF's that I found on some of the older cars that I was using. My brain is starting to itch.

Ninja
2005.03.21, 03:17 PM
i wish they had nose mount info with them too, like which bodies can interchange without changing the nose mount plates :D i know the NSX and the CLK can use the same mount, but dont know about any others

HammerZ
2005.03.21, 03:21 PM
I figure the nosemounts are specific to the body. Every one I've seen has the car name molded onto it.

Ninja
2005.03.21, 03:34 PM
I figure the nosemounts are specific to the body. Every one I've seen has the car name molded onto it.
yeah they have the body name molded to the plates to make it less confusing for beginners swapping bodies, i know the NSX and CLK are interchangeable, and i think the Skyline GT-R and Porche GT3 are as well. i was just thinking that it would make things easier for some people, and nice info to have, some companies sell aluminum nose mounts for some bodies, but for the bodies i have i dont see any aluminum available, but if i could find an aluminum mount that will fit a couple different bodies i have it would appeal to me more to buy one :D

arch2b
2005.03.21, 03:54 PM
if you know for fact (personal experience etc.) that some nose clips are interchangeable, please start a list here as well which can be updated etc.

lets keep the chat to a min. ;) so the real beauty of this thread can be seen more easily, that includes myself :rolleyes: :p i tend to ramble...

HammerZ
2005.03.21, 04:48 PM
I tracked down the Readyset and ASC numbers for these two. I did have to look elsewhere for one number.

Nissan Skyline GT-R R32 MR-01
Readyset: 30352GM-B
ASC: MZG35NA

Ferrari F40
ReadySet : 301204
ASC: MZC18R/ MZC18Y

HammerZ
2005.03.22, 03:33 PM
Some more older ones that I filled out for this.

Toyota Altezza 280T

ASC part number(s): MZC 9
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ18AM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 35mm


Toyota Sprinter Trueno AE 86 (Hatchi Roku)

ASC part number(s): MZC 10
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ19
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 35mm


Skyline GT-R KPGC10

ASC part number(s): MZC 11
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ19(maybe?)
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


AMG Mercedes CLK

ASC part number(s): MZC 12
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ23/ MZ23AM/ MZ23GL
Front wheel width: N
Front wheel offset: 2.5mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: 70mm
Rear chassis width: 70mm
Receiver antenna D size: 35mm


Toyota Vits RS

ASC part number(s): MZC 13
RTR part number(s):
Type of chassis: MR01
Motor pod setting: High
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ24
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: n
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 15mm


VolksWagen New Beetle

ASC part number(s): MZC 14
RTR part number(s):
Type of chassis: MR01
Motor pod setting: High
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ25
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: n
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 23mm


Mugen NSX

ASC part number(s): MZC 15
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ23/ MZ23AM/ MZ23GL
Front wheel width: N
Front wheel offset: 2.5mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: 70mm
Rear chassis width: 70mm
Receiver antenna D size: 15mm


Mazda Savanna RX-7 FC3S

ASC part number(s): MZC 17
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ19(?)
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Ferrari 360 Modena

ASC part number(s): MZC 18
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ27
Front wheel width: N
Front wheel offset: 3mm
Rear wheel width: W
Rear wheel offset: .5mm
Front chassis width: 72mm
Rear chassis width: 72mm
Receiver antenna D size: 20mm

HammerZ
2005.03.24, 09:56 PM
This is on the MR01F for those bodies that need it to run.

arch2b
2005.04.05, 01:15 PM
you guys have been doing great! :D i have one to add but ti will have to wait till i get home to transfer the data (300c), if it hasn't been done already.

saiyan
2005.04.08, 04:23 AM
Your the man Hammer! :)

I'll add my enzo when it arrives if it hasn't been already.

HammerZ
2005.04.11, 07:42 PM
Your the man Hammer! :)

Just trying to do my part, to give back as much as I have got out of this forum.

I just got my Chrysler 300C from the shop today. Thought since I had the sheet handy.


Chrysler 300C

ASC part number(s): MZG101S/ MZG101M
RTR part number(s): 30371S/ 30371M
Type of chassis: MR015 MM
Wheelbase: LL/ 98mm
Suspension limiter: 5
Wheel set part number: MZH152CM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 40mm

HammerZ
2005.08.09, 05:20 PM
I added another one, it has been awhile

Lamborghini Murcielago

ASC part number(s): MZG207Y/PG
RTR part number(s): 30466Y/PG
Type of chassis: MR02MM
Wheelbase: 98mm/ LL
Suspension limiter: 5
Wheel set part number: MZH218S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 3mm
Front chassis width: 70mm
Rear chassis width: 76mm
Receiver antenna D size: 23.5mm

Twenty-Se7en
2005.08.19, 03:00 AM
mini-zracer is commited to having a better shop.... so on and so forth, gotch. I am not knocking that... just, why try to complete something so complex as this task before doing something as simple as collecting pictures of the autoscales and posting them. Why does the consumer have to wait for everything to be "perfect" ... it is losing our fair website sales everyday.

If I get some time I will contribute to this, I think it is a good idea... I just wish that the basics were more important.

arch2b
2005.08.19, 06:37 AM
trust me, this is not a high priority feature, it just happens to be one that is member reliant thus the sooner i started it the more content it would likely have. you know long it takes to get people to submit anything.... we've been very lucky that a few have been very generous with their time ;)

arch2b
2005.08.30, 10:35 PM
i finally remembered to scan the ferrari testarossa info card.

bda52
2005.09.17, 07:42 PM
Ford GT

ASC part number(s): MZG209R
RTR part number(s): 30470R
Type of chassis: MR-02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH220S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 2.5mm
Front chassis width: 70mm
Rear chassis width: 75mm
Receiver antenna D size: 23.5mm

bda52
2005.09.17, 07:47 PM
FORD F-150

Body Set: MVG12R
Wheel Set: MVH10
Tire Width: N
Wheelbase: A3

HammerZ
2005.09.18, 09:01 PM
I'll add the Ferrari F 50 to the mix. The neat thing here is the F40 wheels uses the same rear offset and the front will fit with the MR02 chassis swap, and these are ferrari wheels in a newer style than the older F40 style wheels.

Ferrari F 50

ASC part number(s): MZG304 Y/R
RTR part number(s): 304556 Y/R
Type of chassis: MR02 RML
Wheelbase: L 94mm
Suspension limiter: 5
Wheel set part number: MZH210
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 2.0mm
Front chassis width: 70mm
Rear chassis width: 74mm
Receiver antenna D size: 20mm

HammerZ
2005.10.17, 05:24 PM
I was working on the White Body list adding wheelset numbers, there are a few more I still need to add. I did at least get some of the "classic" cars listed here and some of the other odd ones. I will continue later with it.

HammerZ
2005.10.17, 08:13 PM
Here's the updated listing, there are a few new bodies I have no information on as far as wheelset part numbers. Here's those posted below.

MZB35
Ferrari 612 Scaglietti White Body
Wheelset #

MZB37
Ferrari 360GTC White Body
Wheelset #

MZB44
Honda Fit White Body
Wheelset #

MZB59
Vauxhall BTCC Astra Coupe White Body
Wheelset #

MZB60
Ferrari 575GTC White Body
Wheelset #

MZB61
Ford GT White Body Set
Wheelset #

arch2b
2005.10.26, 08:09 PM
i got 2 new bodies that i will scan and attach the info cards for... murci and 360 gtc :p

HammerZ
2005.10.30, 08:08 AM
I thought we had one on the Testarossa, well here we go straight off the info card.

Ferrari Testarossa

ASC part number(s): MZG309 BK/R
RTR part number(s): 30465 BK/R
Type of chassis: MR02 RML
Wheelbase: L 94mm
Suspension limiter: 5
Wheel set part number: MZH216S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 3.0mm
Front chassis width: 70mm
Rear chassis width: 76mm
Receiver antenna D size: 30mm

HammerZ
2006.05.07, 01:11 AM
Got a few new ASC's, so I scanned the cards in them. The Lamborghini Countach LP400, and the Nissan Fairlady Z.

HammerZ
2006.07.26, 10:27 PM
My new ASC, note the LD (large diameter) rear wheels. The wheels are about 21-22 mm diameter, they are larger than the front wheels are. I have to see how well this is on the track.

arch2b
2007.08.05, 05:17 PM
does anyone have any more of these to add? it's been awhile...

marc
2007.08.14, 10:30 AM
I was going to do the Batmobile, but the only spechs it had was on the back of the box and in Japanese. Same goes for my Skyline Super SIlhouette. I could scan it in, but unless you can read Japanese, it would be useless.