PDA

View Full Version : Now this is a motor mod...


Thomas P
2005.06.12, 12:51 AM
Have read about "fastman" here on racer.com, and liked his motormod 280 engine on a tiny 1:27 monster...damn that must be one fast car..

So after 8-cells, X-SpeedPro, i begun to get bored, my plans were to do a "fastman". but why stop there? :D

So, now this is one fast car Permax Speed 400 + 16T piniong, direct on Diffgear

Had to glue the tyres :D they almost exploded..its heavy..and no, it do not flip so easy that u can think, it lays down as a..what u call it? sure if i throtle full it rise, but not so extreme as the X-speed pro with the extra gear in the transmission..

i its the fastest 1:27 monster i seen,

http://www.miniz-forumet.org/monster/emp/3804.jpg

http://www.miniz-forumet.org/monster/emp/3805.jpg

http://www.miniz-forumet.org/monster/emp/3806.jpg

SonicFury
2005.06.12, 12:53 AM
okay now that's just too much. I'm sure it's fun to drive and be proud of, but too much.

Congrats anyways for making a first.

Thomas P
2005.06.12, 01:35 AM
There is noting as "to much" :p...Yes it´s realy fun to drive, i didnt think it would be so easy to drive with this kinda motor..a lot more "friendly" compare to the X-speedPro with the extra gear in transmision, but topspeed are a litle bit higher ;) :D

Ibrake Ifry
2005.06.12, 12:09 PM
so in terms of torque how much does that speed 400 produce...how much faster is that than an 8 cell xspeed pro? looks really nice

Thomas P
2005.06.12, 12:20 PM
Well, im no motorguru at all, but the Torque are say..good verry good, the car weights much more, and do not flip so easy. Topspeed? it just destroy my X-speedPro´s max...I havnt maxed it out yet,its to narrow spasces where i drive

So my answer--> just crush the XspeedPro

Did well my woman held the Camera, but she pressed Zoom :( and thats why it dont looks so fast

LVCplayer or Quicktime


Film 1--> EMP-Permax Speed 400 maskin + 16 T Direktdrift (http://www.miniz-forumet.org/monster/380film.MOV)



Film 2--> EMP-Permax Speed 400 maskin + 16 T Direktdrift (http://www.miniz-forumet.org/monster/380film1.MOV)

byebye
2005.06.12, 03:17 PM
That's pretty crazy! I have ran the x-speed pro in my monster with a 3x3 FET stack and it's hella quick. I have a plasmatomic I want to run in it next. Nothing fancy but with the plasmatomic it had amazing torque but I never had a chance to run it in a straight line.

I would think with that much weight you could possibly do it more efficiently with a smaller faster motor but then you would have a lighter less stable car. Mine never rolled on the street. The street I ran on had alot of loose gravel and with so much wheel spin it would do understeer doughnuts. Anyway goodjob!

-Byebye

Thomas P
2005.06.13, 12:34 AM
A smaller enige dont have this tourqe, and i need it since the piniong are directly to the Diffgear im running ratio 59/16, and this engine costs say 10-13 dollars, and dont rpm´s so good :)

Drivspänning (V): 5-8
Märkspänning (V): 6
Rek # celler: 6 (upp till 8 celler OK)
Tomgångsvarv (rpm): 17400
Tomgångs ström(A): 0.7
RPM @ max verkningsgrad: 14800

So with a "real" 400 engine, id say, it would be totaly insane to drive any tip on a fast good engine :D

Samuelf
2005.06.13, 10:57 AM
A smaller enige dont have this tourqe, and i need it since the piniong are directly to the Diffgear im running ratio 59/16, and this engine costs say 10-13 dollars, and dont rpm´s so good :)

Drivspänning (V): 5-8
Märkspänning (V): 6
Rek # celler: 6 (upp till 8 celler OK)
Tomgångsvarv (rpm): 17400
Tomgångs ström(A): 0.7
RPM @ max verkningsgrad: 14800

So with a "real" 400 engine, id say, it would be totaly insane to drive any tip on a fast good engine :D

Wow. Just looked at the pictures of that insane setup. It's hard to believe there's an actual mini monster behind that huge engine. ;)

Oh, btw... You're a swede?

TNB
2005.06.13, 11:35 AM
okay now that's just too much. I'm sure it's fun to drive and be proud of, but too much.

Congrats anyways for making a first.
I saw a similar one sometime back. My first thought was that it was difficult enough preventing a Monster from doing a back flip on a not so steep incline so it would be pretty much restricted to flat surfaces. However, my heavier GPM'd Monster does seem to handle "rougher" surfaces and terrain better than my lighter 40th Anniversary editions, including the one with heavier wheels. Then again, my GPM'd Monster doesn't have all the weight in the rear end like the "giagantic" sized-motored monsters.

Ibrake Ifry
2005.06.13, 12:52 PM
just wondering, how much voltage you can put on those bigger motors? A 3 cell poly with a hotter 400 motor would make that thing be more than a monster! in terms of weight distribution how does that thing handle? does it understeer a lot?

Thomas P
2005.06.13, 11:25 PM
Samuelf: yes i am :)

TNB: now my monster it´s just a tarmak racer :D..

Ibrake Ifry: On this engine, id say this is it( i think) im been running my tiny 130 size X-speed Pro on 9.6 and that´s a lot of juice :D:D fired up 3 engines on 1 week.

And,yes i will mount a "real" 400 engine @ midsummer :)

3Cell LitiumPoly :D damn that woult be nice..gonna need some new ESC for that.

Both yes and now, under aceleration it´s understering,but not to much, it´s kinda handy this car..the rolling has almost stop but thats thanks to the extra weight( thank god for that..erlier this car just flip/rolled over all the time,with 4-6 cells...ive got double dmper springs on now

Thomas P
2005.06.20, 01:43 PM
Just klocked this little beast..43 km/h..propp about 99 + on the speedchecker thats so corectly measure :D...the tires just like the mamba8000+RC18T car :D just balllloning..

did anyone say baloon =) (http://www.miniz-forumet.org/monster/balong.MOV)

williams F1#3
2005.06.20, 04:46 PM
Just klocked this little beast..43 km/h..propp about 99 + on the speedchecker thats so corectly measure :D...the tires just like the mamba8000+RC18T car :D just balllloning..

did anyone say baloon =) (http://www.miniz-forumet.org/monster/balong.MOV)
LOL
thats awsome :eek:

Thomas P
2005.06.22, 12:25 PM
Yes it is..it´s totaly insane :D..BUT next week this Monster, gonna own ;)

CC´s Mamba 5400 + ESC, 2 x600 mAh LitiumPolymer 3S 11.1v (from PQ), coming later next week i hope :cool: ..gonna be the fastest there is?