PDA

View Full Version : iw motor on a kyosho board


wkn
2005.09.06, 11:25 PM
i have a iwaver 02 and i put a kyosho mr01 board in it and i was think of getting this package from *******

http://www.toy east.com/v3/pdtdetail.asp?pdt_id=A02100687

now the motor that comes with the package will i fry the fets on the kyosho mr01 board.thanks

Ninja
2005.09.07, 12:09 AM
last i heard, that motor was stock FET safe, but i wouldnt push it with high gearing untill tested with a 6 or 7 tooth pinion first

wkn
2005.09.07, 01:05 AM
last i heard, that motor was stock FET safe, but i wouldnt push it with high gearing untill tested with a 6 or 7 tooth pinion first

ok man thanks for the info.

Ibrake Ifry
2005.09.07, 01:34 PM
no way!!!!! iwaver xspeed plus will fry a stock kyosho board!!!! THAT THING IS 27 TURNS!!

Draconious
2005.09.07, 02:14 PM
that motor will fry a Kyosho PCB...

by stock fet safe, they mean their own PCB, wich is more robust, only beause its not as finely detailed as the Kyosho one, when it comes to its electronics...

Ninja
2005.09.08, 12:30 AM
i thought the x-speed pro was 27 turns? and that is the standard Iwaver x-speed. correct?