PDA

View Full Version : The Carbo Monster


carbo6cell
2005.10.13, 07:11 AM
Hi,

you know the newest Carbo
The Carbo Monster......
Here some pictures

http://www.carbo6cell.ch/media/DIR_88527/DVC00036.JPG

http://www.carbo6cell.ch/media/DIR_88527/DVC00012.JPG
three deck konstruction

http://www.carbo6cell.ch/media/DIR_88527/DVC00014.JPG
Individual height adjustmenting of deck (with distances) at the central deck are for the print bolted and held in front with plastic - a mounting plate as with the Carbospitfire

http://www.carbo6cell.ch/media/DIR_88527/DVC00001.JPG
At the suspension also the mounting plates for the cells are appropriate

http://www.carbo6cell.ch/media/DIR_88527/DVC00037.JPG

More pictures on the Carbo Home Page

The production begins January 2006

Dejan

DogbreathRacing
2005.10.13, 09:30 AM
Oh geez...........Thanks man, now I have to go buy a new keyboard, I just can't get all the druel off this one...................


That is the absolute coolest :eek:

Give me a price so I know how many of my kids I have to sell off for scientific experiments to buy it! ;)

HammerZ
2005.10.13, 01:08 PM
Love the shiny upper links.

carbo6cell
2005.10.14, 05:11 AM
Hi ,

thanks for your interest

The price is not yet definitely however with 60-70 Euro the cheaply Carbo
( 70- 85 USD )
only for the Chassis

As accessories is available :

http://www.carbo6cell.ch/media/DIR_88527/DVC00020.JPG
Carbon Front Bumper 2-3 Variants

http://www.carbo6cell.ch/media/DIR_88527/DVC00021.JPG
Carbon Rear Bumper /Wheelie Bar ( only the side elements 1-2 Variants )


Dejan

fetch-it
2005.10.15, 02:06 PM
Hi Dejan, it look's great. I would be interested to see it with the ESC in there?

Are you using after market electronics as you have with your carbo xmod??

p.s. I have the rest of the alloy needed to finish my carbo Zmod arriving this week :D

pimpsmurf
2005.10.25, 10:11 PM
I want one very badly. Did I read that you said that you can also mount AA holders correctly? That would be rad for a 2s2p lithium ion setup!

What about lithium polymer power? I want to use a 3 cell lipo with it, but I can't see what the chassis would look like without the sides on would look like. Could you fit a thin lipo in there?

-JNY

Twenty-Se7en
2005.10.26, 11:16 AM
man that looks like it could take a beating. Slick and clean too. Damn nice work if I do say so... fine stuff.

carbo6cell
2005.10.27, 07:52 AM
Hi,

@pimpsmurf

- possible are xmod Battery Holders

- other AAA Holders

- other AA Holders

- 2 Li-ion Cells

- 2 Lipos but not longer than max: 51 x 30 x 12 cm
3 Lipos ( on the bridges ) ??????

- mini z electronic
- I-Waver elektronik
- Race Z elektronik
- and other electronic .......


Dejan

pimpsmurf
2005.10.27, 04:16 PM
Hi,

@pimpsmurf

- possible are xmod Battery Holders

- other AAA Holders

- other AA Holders

- 2 Li-ion Cells

- 2 Lipos but not longer than max: 51 x 30 x 12 cm
3 Lipos ( on the bridges ) ??????

- mini z electronic
- I-Waver elektronik
- Race Z elektronik
- and other electronic .......


Dejan

Wow. I'm looking forward to this.

I was wondering about mounting the lipo through the chassis so it comes out of both sides. I think 4 lithium ions AA cells would probably be a better solution since there is actually room. I was always worried about it rubbing on the tires when the suspension is articulated and the wheels turned.

-JNY

fetch-it
2005.10.27, 04:26 PM
Wow. I'm looking forward to this.

I was wondering about mounting the lipo through the chassis so it comes out of both sides. I think 4 lithium ions AA cells would probably be a better solution since there is actually room. I was always worried about it rubbing on the tires when the suspension is articulated and the wheels turned.

-JNY

Hi pimpsmurf,

I think who*nelly uses Li-Po and has it mounted through his chassis somehow. I'm not sure what he's done with the electronics? (It's worth a look!)