PDA

View Full Version : Duratrak ICE charger


Magnumb
2006.04.16, 03:49 PM
Purchased this ICE charger and a bulldog RDC-15 power supply. I would like to charge my 1000mah AAA's but do not have a holder with a charging jack. For the AA's I use my Airtronics M8 to charge. Do you know of any that fit the AAA's. Thanks Justin

briankstan
2006.04.16, 04:07 PM
PN and Atomic have good ones

gasman1
2006.04.16, 06:36 PM
Purchased this ICE charger and a bulldog RDC-15 power supply. I would like to charge my 1000mah AAA's but do not have a holder with a charging jack. For the AA's I use my Airtronics M8 to charge. Do you know of any that fit the AAA's. Thanks Justin

go to radio shack and get a 4 cell battery tray. use the alligator clips that come with the Ice charger and clip it to the leads to the tray

look here
http://www.radioshack.com/product/index.jsp?productId=2062254&cp=&pg=2&origkw=battery+holder&kw=battery+holder&parentPage=search

tzero
2006.04.16, 07:15 PM
I have a Dynamite Vision Peak Ultra and was wondering if it would be safe to charge useing a tray like this *Link* (http://shop.tinyrc.com/product.php?productid=17035&cat=0&page=1) Because the wires are so thin.
If its not safe whats a good Charger Tray or another charger that charges AAA's.

Magnumb
2006.04.16, 08:18 PM
I went ahead a purchased the PN racing tray and PN 05 BB motor. I really need a Kyosho alum rear gear housing. I guess they stop production on these :eek:

gasman1
2006.04.17, 12:24 PM
I have a Dynamite Vision Peak Ultra and was wondering if it would be safe to charge useing a tray like this *Link* (http://shop.tinyrc.com/product.php?productid=17035&cat=0&page=1) Because the wires are so thin.
If its not safe whats a good Charger Tray or another charger that charges AAA's.

that's very similar to the One I posted a link for and cheaper. your not running that much current thru the wires when charging at 1 amp or less