PDA

View Full Version : Can a mini-z board operate a micro servo?


dean
2006.09.06, 10:25 PM
Does anyone know if a sub-micro servo can operate from a mini-Z pcb?
- wondering - for a project.

arch2b
2006.09.06, 10:31 PM
yes, look at my crt gallery as i have pictures of a hitec servo wired to a mini-z pcb.

HammerZ
2006.09.06, 10:32 PM
Now that has been done before, you can search for some of Killers old threads. I seen some of his old projects that used a standard micro servo wired to a Mini Z board. I think he takes out the servo control board inside the servo and wired the Mini Z board right up to the motor and servo pot. I have not tried it myself. Also look at the old TTTT threads as it is some interesting reading.

herman
2006.09.06, 10:32 PM
i've seen it done somewhere... oh here it is...

http://ikinari-rc.com/index.html

click on others on top of the page and look for 1/32 crt mini carpet racer

ikinari uses a miniz circuit board with micro servo... and yeah i remember arch2b doing the same thing... good luck on your project...

Natedog
2006.10.25, 10:09 PM
yes, look at my crt gallery as i have pictures of a hitec servo wired to a mini-z pcb.

I'm lookin through your galleries atm...but don't see it. What's a CRT gallery?