PDA

View Full Version : Can I delete the brake function?


Z_408
2006.10.01, 11:26 PM
For the MR01's and MR02's, is it possible to delete the brake function?

thanks,
Z_408

stuZ
2006.10.02, 01:38 PM
For the MR01's and MR02's, is it possible to delete the brake function?

thanks,
Z_408
I'll trade you an old 01 board without brake for one with...

ChattavegasSE
2006.10.02, 07:32 PM
My 01's don't have brakes, but my '02 does have a brake. I thought all 01's don't have brakes and all 02's do? :confused:

Z_408
2006.10.02, 07:40 PM
My mistake. I meant to say MR-015's and MR-02's.

Z_408

stuZ
2006.10.02, 07:59 PM
some of the later 01's have brakes too. I think it's the ones with the black servo case.

Z_408
2006.10.04, 10:26 AM
I'll trade you an old 01 board without brake for one with...


Sorry, wish it was that easy. I actually need to change a few of them.

thanks for the offer.

Z_408
2006.11.01, 02:18 PM
Anyone have any sugguestions?

stuZ
2006.11.01, 02:27 PM
Sorry, wish it was that easy. I actually need to change a few of them.

thanks for the offer.

how many? I have three.

jjlove
2006.11.01, 05:28 PM
why dont you want brakes?

Z_408
2006.11.02, 02:41 PM
how many? I have three.

How much do you want for these?

Z_408
2006.11.02, 02:42 PM
why dont you want brakes?

I let kids play with them and it is difficult for them to understand the brake function.

Draconious
2006.11.02, 03:43 PM
I got 2 MR01 PCBs (no brake) from japan readysets, they are still unopened readysets... the problem is the PCB's sell for almost as much as a readyset.
They are at the top of my forsale page, link in my signature below.

Buy me a MR02 chassis set ;) for cost of PCB and labor... for each one.

And send me your MR02, or whatever chassis you want them in, and I will remove the PBS from those readysets and install them for you... not that you cant do it your self ;).

stuZ
2006.11.02, 04:22 PM
How much do you want for these?
well, they are currently in cars. I would rather trade.
One has 4562's, one has the crystal socket upside down in an OL,
and they all have oversize power wires soldered directly to the chassis.
I would put 3717 fets on the other two, and turn the crystal socket over on the one, and you could just clip off your power wires to keep the connectors.

Z_408
2006.11.07, 03:41 PM
well, they are currently in cars. I would rather trade.
One has 4562's, one has the crystal socket upside down in an OL,
and they all have oversize power wires soldered directly to the chassis.
I would put 3717 fets on the other two, and turn the crystal socket over on the one, and you could just clip off your power wires to keep the connectors.


Please email me about this, I am very interested.

Binh@InsideLineRacing.com

thanks.