PDA

View Full Version : Custom Plate Decals


briankstan
2006.10.14, 01:59 PM
here are some of my custom made plates

http://www.saltlakemini-z.com/Public/Utah_briankstan.jpg http://www.saltlakemini-z.com/Public/Utah_mini-z.jpg

http://www.saltlakemini-z.com/Public/Utah_ZZaniac.jpg http://www.saltlakemini-z.com/Public/Utah_ZZ.jpg

http://www.saltlakemini-z.com/Public/maryland_arch2b.jpg http://www.saltlakemini-z.com/Public/colorado_RMXRC.jpg

http://www.saltlakemini-z.com/Public/michigan_HFAY.jpg http://www.saltlakemini-z.com/Public/michigan_KYOSHO.jpg

http://www.saltlakemini-z.com/Public/michigan_TINYRC.jpg http://www.saltlakemini-z.com/Public/michigan_MZR.jpg

http://www.saltlakemini-z.com/Public/michigan_MINI-Z.jpg http://www.saltlakemini-z.com/Public/michigan_annarbor.jpg

Here is a shot of one installed on my Burnt Orange Murcielago

http://www.saltlakemini-z.com/Public/Burnt_orange_Murci-6.jpg


if you see any really cool plates be sure and send me a pic. thanks.

arch2b
2006.10.14, 02:14 PM
can't wait to post picture of mine :)

briankstan
2006.10.14, 02:42 PM
can't wait to post picture of mine :)

make sure you give them plenty of time to dry. I would say a day for the ink and 1 or 2 days for the clear. this will provide you with the best results. :D

HammerZ
2006.10.14, 10:45 PM
Some nice photoshop skills there.

The other day I was messing with the acme plate maker, and it looked like it was down. I wonder what is going on with that. I did follow a link from there to a site that had plate images with no lettering.

briankstan
2006.10.15, 01:11 AM
Some nice photoshop skills there.

The other day I was messing with the acme plate maker, and it looked like it was down. I wonder what is going on with that. I did follow a link from there to a site that had plate images with no lettering.

thanks for the tip. that would save me some time if I could find the plates with out the lettering.

I'll see if I can find it.

HammerZ
2006.10.15, 01:18 AM
http://www.rtbrandon.com/blankplates/

Here you go. These are the same blanks that the acme plate maker uses.

briankstan
2006.10.15, 01:26 AM
http://www.rtbrandon.com/blankplates/

Here you go. These are the same blanks that the acme plate maker uses.

Thanks again. althought the size is small it's still easier to re-create them with out the #'s on them. this will be a very handy site.

For your help I'll make you a couple designs, what would you like on them? and do you have a particular plate that you like?

HammerZ
2006.10.15, 01:47 AM
I don't have any ideas right now. I would like to see the diamond state represented though.

briankstan
2006.10.15, 02:06 AM
I don't have any ideas right now. I would like to see the diamond state represented though.

is the diamond state arkansas? I looked through them. there are a few nice ones.

HammerZ
2006.10.15, 04:31 AM
http://www.arkansas.com/things-to-do/diamond-hunting/

Yep, I did have Murfreesboro in mind with that reference.

tytooo
2006.10.15, 06:14 AM
It look's very nice!!!

I will draw somes for our Mini-z Team in France!!

:D

arch2b
2006.10.15, 08:06 AM
http://www.rtbrandon.com/blankplates/

Here you go. These are the same blanks that the acme plate maker uses.
great find! this is the first place i've seen the blank md agicultural plate. i have a particular liking for that plate since i grew up surrounded by dairy farms which are all now housing developments

briankstan
2006.10.15, 05:40 PM
I don't have any ideas right now. I would like to see the diamond state represented though.


here is one, if you have a plate perference let me know.

http://www.saltlakemini-z.com/Public/arkansas_hammerz.jpg http://www.saltlakemini-z.com/Public/arkansas_hammerz1.jpg

Draconious
2006.10.15, 05:54 PM
Natural ;)

briankstan
2006.10.15, 05:56 PM
Natural ;)

duh, thanks for the correction..

HammerZ
2006.10.16, 01:16 AM
Those do look better than my old acme atempts. About every ten years the state issues a new plate design.

briankstan
2006.10.16, 01:05 PM
Here is a few for the Pennsylvania and Texas guys

http://www.saltlakemini-z.com/Public/PA_imxlr8ed.jpg http://www.saltlakemini-z.com/Public/PA_gasman1.jpg

http://www.saltlakemini-z.com/Public/Texas_madf1man.jpg http://www.saltlakemini-z.com/Public/Texas_HIRCR.jpg

briankstan
2006.10.16, 02:57 PM
Virginia plate for spoon..

http://www.saltlakemini-z.com/Public/virginia_spoon.jpg

Spoon
2006.10.16, 03:20 PM
Sweet!!!!!! :cool:

madf1man
2006.10.16, 04:07 PM
sweetamusmaximus! Thanks B

shuter
2006.10.16, 09:58 PM
Very Very Cool Brian !!!

briankstan
2006.10.17, 01:32 PM
Very Very Cool Brian !!!

here is a couple for you and the gackle gang...

http://www.saltlakemini-z.com/Public/north_dakota_shuter.jpg http://www.saltlakemini-z.com/Public/north_dakota_gackle.jpg

http://www.saltlakemini-z.com/Public/north_dakota_HFAY.jpg


and a few for Mini-AZ

http://www.saltlakemini-z.com/Public/arizona_MINI-AZ.jpg http://www.saltlakemini-z.com/Public/arizona_HFAY.jpg

briankstan
2006.10.17, 05:09 PM
I guess you can see that I'm doing plates for all the clubs that are completing in HFAY... :D if there is something specific that you would like on them let me know.

a few for MZ˛

http://www.saltlakemini-z.com/Public/illinois_HFAY.jpg http://www.saltlakemini-z.com/Public/illinois_MZ.jpg

briankstan
2006.10.18, 05:30 PM
a few for California and SRC

http://www.saltlakemini-z.com/Public/california_HFAY.jpg http://www.saltlakemini-z.com/Public/california_HFAY-1.jpg


http://www.saltlakemini-z.com/Public/california_src.jpg http://www.saltlakemini-z.com/Public/california_src-1.jpg

briankstan
2006.10.19, 11:05 AM
a few for CIMR

http://www.saltlakemini-z.com/Public/iowa_HFAY.jpg http://www.saltlakemini-z.com/Public/iowa_cimr.jpg

pinwc4
2006.10.19, 12:42 PM
I guess you can see that I'm doing plates for all the clubs that are completing in HFAY... :D if there is something specific that you would like on them let me know.

a few for MZ˛



Thanks, I am going to have to print a few of these.

briankstan
2006.10.19, 01:59 PM
a few for MC3 (Ontario, Canada)

http://www.saltlakemini-z.com/Public/ontario_HFAY.jpg http://www.saltlakemini-z.com/Public/ontario_MC3.jpg

BillH
2006.10.28, 11:13 PM
How are you guys making those?

briankstan
2006.10.29, 12:29 PM
How are you guys making those?

with Photoshop

arch2b
2006.11.19, 10:21 AM
brian, i just noticed the hfay frapper map, you or i cna chage the dc logo to the tag you made to be consistent. :p

briankstan
2006.11.19, 12:51 PM
brian, i just noticed the hfay frapper map, you or i cna chage the dc logo to the tag you made to be consistent. :p

you want to use the DC GTG Plate? I'll do one up and put there. DC plate or Maryland Plate?

arch2b
2006.11.19, 01:03 PM
dc for names sake i guess

MIR78
2006.11.20, 08:08 AM
this is my customized decals just for 1:32 or 1:24 cars

MIR78
2006.11.20, 08:15 AM
& this is my decals(z-tune type) in r34 JGTC body!

MIR78
2006.11.20, 08:17 AM
and another one!
Hope you like it! It is done with a help from sir herman!