PDA

View Full Version : Atomic Stok Vs Kyosho Xspeed


Al3eRtO
2007.02.01, 05:40 AM
wich is the best one?

Atomic:Ball Bearing Case: yes
Magnet: Neo
Turns: 47
RPM: 30.000

Xspeed: Ball Bearing Case: No
Magnet: Ferrite
Turns: 49
RPM: ?? (how many of it have?)
Thanks Bye Bye
:)

jbevins
2007.02.01, 06:50 AM
just by the specs you've listed the ball bearing can and neo magnets are better but the neo mags possibly will take away from the top speed of the atomic motor, I've ran the X-speed motor both ways in it's stock form and in and ball bearing can with neo mags, definetly the neo mags will give you tons of torque in that cause I just geared up and got my top speed back

briankstan
2007.02.01, 10:12 AM
the atomic stock is a faster motor and has more torque.

it pushes the limit of the stock fets (even though it's listed as stock safe)

you can run it, but the risk of burning fets goes up.


the Xspeed is a nice motor also. maybe the Atomic standard is a better comparison to the Xspeed.

lfisminiz
2007.02.01, 09:05 PM
The awd xspeed is a fast motor.

Al3eRtO
2007.02.05, 03:06 AM
Then is better the atomic stock?I buy it?

nivlacs3z
2007.02.05, 08:08 AM
what are you racing with? If its an MR-02 then the xspeed might be fit for it. If its AWD then you'll probably want the added torque.

Al3eRtO
2007.02.06, 05:50 AM
I racing with mr015... :)

bnwhtlw
2007.02.06, 09:48 AM
it pushes the limit of the stock fets (even though it's listed as stock safe)

you can run it, but the risk of burning fets goes up.

Are you saying this based on 3010 or 3004 fets?

nivlacs3z
2007.02.06, 04:23 PM
you're probably better off with the xspeed.