PDA

View Full Version : help?


jam4
2007.05.06, 01:41 AM
hey my mzm wont move forward what can this be

briankstan
2007.05.06, 01:44 AM
sounds like you have a burnt forward Fet.

jam4
2007.05.06, 01:48 AM
were can i get them and you know a part# thanks

briankstan
2007.05.06, 02:48 AM
were can i get them and you know a part# thanks

the fets are available at the shop here

Good:
3010 FETS (http://shop.tinyrc.com/product.php?productid=18250&quantity=10&xid=2aef731e422046f23eb73813307fbf06)

Best:
4562 FETS (http://shop.tinyrc.com/product.php?productid=16723&quantity=2)

make sure you have someone that is good with soldering or has done them before. it's a little tricky, because of their small size.

these are upgraded fets, and will allow you to run a hotter motor.

jam4
2007.05.06, 04:37 PM
hey thanks for the info and your help.do you know if soldering these is hard iv never done it before

ivanmartin18
2007.05.07, 08:32 AM
hey thanks for the info and your help.do you know if soldering these is hard iv never done it before
If you didn't solder before it's better that you ask someone to do it for you. It's not an easy thing!

Ciao!

aa18
2007.05.07, 10:40 AM
There is a video in the youtube showing how to replace the fet. Just go to youtube site and search for "Fetwechsel Mini-Z" and you will find it.

http://www.youtube.com/watch?v=rKzQXmRh6Og

Then you have some idea on how to do it.

cesarone
2007.05.07, 07:21 PM
there is also a video here that bye bye has just search for the tutorial in the videos forum. :)