PDA

View Full Version : FS-All My Mini-Z Stuff


bemoore
2007.05.10, 09:07 AM
The lot has been sold. Thanks for your interest.



I have the following for sale:

MR-02 with:
- PN Racing Multi Length Graphite Disk Damper set
- MiniZ Racer dry bearings
- PN Racing Camber Steering Block (1,2,3 deg)
- GPM 1/16 Ti ball diff
- 3Racing Alloy MM motor mount
- Atomic Alloy tie rod 1deg toe in
- 3Racing carbon fiber H plate (med & hard)
- VDS body & wheels (scuffed a little from use but unpainted)
- Atomic Ultra Hardness Kingpins
- 3004 FETs
- Clear chassis NIP, not installed (current one is cracked at H-plate mount)

Airtronics MXA radio w/NiMh batteries & 1 servo
Kyosho stock radio
2 3010 FETs
Iwaver McClaren body(scuffed, but no cracks)
Kyosho Calsonic 350Z body (damaged. Usable but needs repairing.)
Kyosho stock motor NIP
2 sets GPM 8 deg rears NIP
3 sets GPM 8 deg fronts NIP
1 set GPM 8 deg rears *
1 set GPM 8 deg fronts *
1 set Atomic 10deg Grooved tire 8.5mm (70% used)
1 set Atomic 20deg Grooved tire 8.5mm *
1 set Atomic 30deg Grooved tire 8.5mm *
1 set Atomic 10deg Grooved tire 11mm *
1 set Atomic 20deg Grooved tire 11mm *
1 set Atomic 30deg Grooved tire 11mm *
1 set Iwaver rear slicks (50% used)
* - Used in searching for handling setup but never raced.

1 set of Radio Shack crystals
Virtual RC VRC-2 USB adapter NIP
1 Core transponder
2 Plano xxx parts boxes
8 AAA NiMh batteries
stock RM motor pod
stock rear top shock & mounts

$200 for all of it. I'll have all of it at the race this Saturday.
http://i185.photobucket.com/albums/x52/2WheelPilot/CarbodywheelsSmall.jpg
http://i185.photobucket.com/albums/x52/2WheelPilot/TXtiresbatteriesSmall.jpg

http://i185.photobucket.com/albums/x52/2WheelPilot/MR02MMSmall.jpg
http://i185.photobucket.com/albums/x52/2WheelPilot/BodiescrystalsVRCSmall.jpg

Ninja
2007.05.10, 09:59 AM
you can host them on photobucket and use the [ img ] codes here or just attach them to your post through the forums.

pinoyboy
2007.05.10, 10:18 AM
I have the following for sale:

MR-02 with:
- PN Racing Multi Length Graphite Disk Damper set
- MiniZ Racer dry bearings
- PN Racing Camber Steering Block (1,2,3 deg)
- GPM 1/16 Ti ball diff
- 3Racing Alloy MM motor mount
- Atomic Alloy tie rod 1deg toe in
- 3Racing carbon fiber H plate (med & hard)
- VDS body & wheels (scuffed a little from use but unpainted)
- Atomic Ultra Hardness Kingpins
- 3004 FETs
- Clear chassis NIP, not installed (current one is cracked at H-plate mount)

Airtronics MXA radio w/NiMh batteries & 1 servo
Kyosho stock radio
2 3010 FETs
Iwaver McClaren body(scuffed, but no cracks)
Kyosho Calsonic 350Z body (damaged. Usable but needs repairing.)
Kyosho stock motor NIP
2 sets GPM 8 deg rears NIP
3 sets GPM 8 deg fronts NIP
1 set GPM 8 deg rears *
1 set GPM 8 deg fronts *
1 set Atomic 10deg Grooved tire 8.5mm (70% used)
1 set Atomic 20deg Grooved tire 8.5mm *
1 set Atomic 30deg Grooved tire 8.5mm *
1 set Atomic 10deg Grooved tire 11mm *
1 set Atomic 20deg Grooved tire 11mm *
1 set Atomic 30deg Grooved tire 11mm *
1 set Iwaver rear slicks (50% used)
* - Used in searching for handling setup but never raced.

1 set of Radio Shack crystals
Virtual RC VRC-2 USB adapter NIP
1 Core transponder
2 Plano xxx parts boxes
8 AAA NiMh batteries
stock RM motor pod
stock rear top shock & mounts

$200 for all of it. I'll have all of it at the race this Saturday.

How do I post photos?

How much for just the MR-02? :D

Contact me through email through the forums or you can call me.

bemoore
2007.05.10, 11:18 AM
How much for just the MR-02? :D

Contact me through email through the forums or you can call me.
I'd like to try to sell it as a group first. If there's not enough interest, I may part it out.

pinoyboy
2007.05.10, 02:42 PM
I'd like to try to sell it as a group first. If there's not enough interest, I may part it out.

okie dokie. If you change your mind, I can buy the car from you this Saturday ;)

BrianMidnight
2007.05.10, 04:21 PM
I'd like to try to sell it as a group first. .

email on the way

Shaun
2007.05.11, 12:17 PM
No more Mini-Z racing Billy?

bemoore
2007.05.11, 12:41 PM
No more Mini-Z racing Billy?
Nope. I'm hanging it up. You guys are too fast for me. :)

bemoore
2007.05.11, 01:24 PM
okie dokie. If you change your mind, I can buy the car from you this Saturday ;)
Yeah, but in your case, that isn't the same motivation as it would be with others. If I decide to sell it to you, I can just deliver it through your dad. ;)

pinoyboy
2007.05.11, 01:34 PM
Yeah, but in your case, that isn't the same motivation as it would be with others. If I decide to sell it to you, I can just deliver it through your dad. ;)

Yup, either way is fine with me, just let me know if you don't get an offer for the whole thing and maybe we can agree on a price for the car.

I know Eric from chatanooga was looking for an MX-A before, maybe hes still interested :)

bnwhtlw
2007.05.11, 03:07 PM
If you decided to part it out I might interested in that Virtual RC adapter thing, depending on the price.

ChattavegasSE
2007.05.11, 06:57 PM
I am interested in the MX-A!! Please part it out! :(

bemoore
2007.05.12, 09:01 PM
The entire lot has been sold. Thanks for your interest.