PDA

View Full Version : 44T Motor


JamesJozef
2007.06.26, 10:48 PM
I've read that 43 turns is the max for 3010 FET's, and 44 is one over that, so it's safe, but how long could expect to run it for without melting/warping the stock kyosho motor mount?

hakhawk
2007.06.27, 01:00 AM
44 should be fine. its only if you go less turns im pretty sure. going say a 25 turn motor is going to draw more current than a 50turn motor.

Flashsp-2
2007.06.27, 03:28 AM
44 turns is perfectly fine for the FETs, I have run as low as 35 without any damage. I would say to keep an eye on the chassis directly above the motor, I melted that before I did the stock motor holder. The motor holder has a steady supply of air, but above the motor is nothing but heat and tight space. I don't know how long you plan on running it, but I would check on it after every pack.

JamesJozef
2007.06.27, 09:49 AM
44 should be fine. its only if you go less turns im pretty sure. going say a 25 turn motor is going to draw more current than a 50turn motor.
You're correct. I'm just making sure for when and if my order from tinyrc comes in.