PDA

View Full Version : question regarding maha c-9000 break in function...


herman
2007.11.20, 12:48 AM
what capacity do you select if your battery is say 850mah? do you choose 700mah or 900mah? since the capacity selection comes in 100mah steps?

thanks for any reply :D

mk2kompressor
2007.11.20, 12:51 AM
900mah is closer to 1c than 700mah,it depends on how you want to break in the cell,i think it is recommended in the destructions for a .1c charge on new batts :)

Red Team
2007.11.20, 02:21 AM
what capacity do you select if your battery is say 850mah? do you choose 700mah or 900mah? since the capacity selection comes in 100mah steps?

thanks for any reply :D

I think you wanted to ask if you choose between 800 or 900 mah, isn't it ?

It happend to me also to have to choose and I always use the lower number cause anyway, the real capacity has a good chance to be lower than the written capacity. Am I wrong ?

Sinister_Y
2007.11.20, 07:52 AM
I personally would use the higher number. For my intellect 750Mah, I use 800Mah charge. For discharge, I still use 1000 Mah for everything.

mk2kompressor
2007.11.20, 09:55 AM
for battery break in you would not charge anywhere near the full capacity of the battery.
.1c would be 100mah on a 1000mah batt,a 1c fast charge after they have been broken in would be 1000mah charge

Red Team
2007.11.20, 10:20 AM
That's correct...herman worried what capacity he should select when the charger it's asking, in order to charge .1c of that capacity.

mk2kompressor
2007.11.20, 11:17 AM
so in this case he wants the lowest,100 mah :)