PDA

View Full Version : What can i use


Hunty
2008.03.03, 03:00 AM
Well when i got my mini-z i dident get nothing to gte the wheel nuts of is there aneything i can use to get them off :P

Hunty
Thnx for help if you do give me some :P

Scrapper
2008.03.03, 06:35 AM
aRE U ABSOLUTELY SURE THERE ISNT A RED TOOL

byebye
2008.03.03, 06:46 AM
The Ready to Run kit comes with a tool to remove the nuts. I suggest you purchase some alloy nuts from the shop here and at the same time buy the Atomic 3 in 1 tool. The tool has a cross tip screw driver, hex key, and wheel nut socket.

Kris

Hunty
2008.03.03, 07:40 AM
I didn't get one for sure but when i gte my next payment i will buy some :)

HammerZ
2008.03.03, 11:08 AM
The stock MR01 plastic nuts are 5.5mm in size. Without the red T tool I have used my fingernails to twist them off. Then the 4.5mm locknuts to replace them with. Those MR01 nuts are known to strip out very quickly. For nutdrivers make sure you get a thin walled type. I have also used the Tamiya four way tools that come in the 1/10 kits, you can get those separately. Those are good to have on hand. Just look for a Tamiya Tool Bag.

AlloyENZO
2008.03.13, 12:31 PM
Just order the Atomic ones in a color of your choice along with their tool. I bought the nuts and not the tool and the cheap plastic Kyosho one has already stressed in the weak parts and basically broke. :mad: