View Full Version : 02M inside Enzo
JOSEC
2008.03.18, 06:29 PM
http://img116.imageshack.us/img116/9606/insideenzoyi1.jpg
Hi friends, this is my new 02M(arrival today) inside Firelap Enzo
My cuestion is:
can buy the motor plug spare for another motors...?
GREETINGS FROM SPAIN...
fangel
2008.03.18, 10:56 PM
Josec,
On behave of the iwaver community, I welcome you to the forum.
Nice picture, you took 2 picture on similar angle and place it one on top of the other correct? Also I see that you have fully upgraded your chassis with metallic parts. Everything looks cool, as for the motor plug, we currently don't have it on sell separately, but it's actually very common 2 pin micro plug at which you would be able to buy from electronic parts store.
JOSEC
2008.03.19, 07:22 AM
Thank you for the reply..:-)
Yes, are two photos on one like this:
http://img291.imageshack.us/img291/5195/enzo3vh6.jpg
GREETINGS JOSEC...
fangel
2008.03.20, 12:17 AM
I'm glad you like your chassis and the body, I think they both well made and provide a very good combination.
JOSEC
2008.03.26, 04:39 PM
Hi, Fangel, i´m going to order a iwaver motor from Toyeast for my 02, can fit any with the factory ESC?
The motors are:
IW0005A1 IWAVER I-STOCK MOTOR
IW0005A2 IWAVER I-PLUS MOTOR
IW0005A3 IWAVER I-PRO MOTOR
IWAVER UPGRADE MOTOR (IWAVER/MINI-Z RACER SERIES)
http://img129.imageshack.us/img129/8569/img3184zc7.jpg
I´m very glad with my new car
GREETINGS JOSEC...:)
fangel
2008.03.27, 12:21 AM
i-stock and i-plus are stock FET save for both MR-02 and NR2
i-pro motor will push the stock FET to the limit, it is recommend that FET should be upgraded.
iwaver upgrade motor has a motor plug for connector, which is design for 01/02M for plug and play actions.
vBulletin® v3.8.3, Copyright ©2000-2025, Jelsoft Enterprises Ltd.