PDA

View Full Version : Need F1 board Help


briankstan
2008.04.06, 10:03 PM
I have a board in one of My F1's that when turn on will turn one direction but won't recenter or turn the oppisite way. so it just stays full lock to one direction. It seems like it's not reversing the power to turn the servo motor the other way. any ideas?

briankstan
2008.04.06, 11:06 PM
I forgot to mention, this is a 2003 F1 Board that came in a RTR. it just started doing this one day out of the blue. I figured it was the steering fets, I have replaced them, but is't still doing the same thing.

mk2kompressor
2008.04.07, 01:12 AM
ive had a similar problem,have you checked the 3 legs on the smaller pot attached to the board?

briankstan
2008.04.07, 02:26 AM
ive had a similar problem,have you checked the 3 legs on the smaller pot attached to the board?

the one you use to set the trim?

mk2kompressor
2008.04.07, 02:33 AM
yup,ive had a dry joint on this part before:(
either that or dust in it,id turn it back and forth a little and see if its the same