PDA

View Full Version : What bodies fit MR-01


Hunty
2008.06.22, 03:01 PM
Hey guys i have bin asking this befor and i want to know what bodys will fit mr01 because i am bored of my viper

dameetz
2008.06.23, 02:46 AM
Hey guys i have bin asking this befor and i want to know what bodys will fit mr01 because i am bored of my viper

You can fit any ASC bodies for Mini Z racer providing you have the correct motor pods and wheel off set with it. Here a link if you want to look at.

http://mini-z.home.att.net/bodies.htm

HammerZ
2008.06.26, 01:14 AM
Any MR01-015 RM bodies would fit. The MM style bodies you will need to figure out something with the wheelbase. Many MR02 RM bodies can work as well, just the front wheel offsets may be some issues. The good thing here is they all mount the same way, about the only minor problems I have had was the MR01 nose clips needed some light filing on the sides to fit the MR02-015 chassis without cracking them.

Hunty
2008.06.26, 01:33 AM
Just that i am looking on ebay and i saw this night rider body and i wnat it :)

FrankW1029
2008.06.26, 06:18 AM
Just that i am looking on ebay and i saw this night rider body and i wnat it :)

it will work. those were made for the mr01 from the start I believe.

marc
2008.06.29, 11:01 AM
Pardon me, but that's KNIGHT RIDER! Don't forget the K please! Anyway, will the Toyota Altezza work on the MR02 chassis? If so, what motor mount and what setting's does it need? And is the offset different on the MR02 from the MR01?
Yes, the Knight Rider bodies' KITT and KARR were orginally MR01's and were at one time available as ready sets. I've got both AutoScale's and their awesome with the front scanner flashing back and forth. The yellow scanner on KARR is particularly brighter then KITT's red light and look's down right awesome at night with the light's off and just the Mini-Z KARR's flashing back and forth. Look's menacing.

FrankW1029
2008.06.29, 06:10 PM
altezza probably won't fit mr02. the R32 is wider than the Altezza and that body will still stretch when you put it over the mr02. Altezza's a 90mm wheel base, no?

i have the F40 on mr015 and I love it.

marc
2008.06.29, 06:26 PM
The F-40 was originally an MR01 so naturally it would fit MR15. Should fit MR02 just as well being so wide. At least, one would think.

FrankW1029
2008.06.29, 06:33 PM
yes, I know that. the reproduction of the F40 were sold as MR02 offset body.

Hunty
2008.06.30, 02:05 AM
Well i will save up some of my money now i know how to change teh config of the back by just un screwing the back lol and moving it up and down i dident know it was that simple