PDA

View Full Version : December 3hr Endurance!


Programmers
2008.11.14, 03:39 PM
Bri hasn't announced a date yet but I will let you know in advance so everyone has chance to get:

light kits!

Buy 'em ASAP as 30 minutes of next months race will be in the dark.

Also, be as well prepared as possible. Be well prepared! Make sure:

You have your light kit fitted and ready to turn on for the dark stage.
You tape your body and tyres on.
You have 3-6 sets of batteries charged.
You have all the tools you will need, including spare parts should you have a bad accident.

Be. Well. Prepared! Can't stress that enough.

This way, it will be for fun for you when you aren't running around like a headless chicken for a new h-plate.

See you next month!

mk2kompressor
2008.11.14, 03:42 PM
sounds like fun:)

575racer
2008.11.14, 06:36 PM
kick-awesome, were running this in 2 man teams like last time?

oopster
2008.11.15, 06:33 PM
I wasn't sure what to order, so I've ordered about 101 sets of tyres from Cain which I should hopefully have for the next meet. I'm not sure what the prices are as they look a little confusing, but, I think I've ordered enough to get them at a good price.

mk2kompressor
2008.11.15, 06:36 PM
8 rear 20-30 front if they are the gpm tyres:)

oopster
2008.11.15, 06:44 PM
Thanks Matt, I've ordered a mix of the below, I told Cain more of the popular ones, but to try and sort out at least 1 of each.

MR2888AF08G RUBBER FRONT SLICK TIRE(FOR ORI) 8 DEG - 1PR
MR2888AF10G RUBBER FRONT SLICK TIRE(FOR ORI) 10 DEG - 1PR
MR2888AF15G RUBBER FRONT SLICK TIRE(FOR ORI) 15 DEG - 1PR
MR2888AF20G RUBBER FRONT SLICK TIRE(FOR ORI) 20 DEG - 1PR
MR2888AF25G RUBBER FRONT SLICK TIRE(FOR ORI) 25 DEG - 1PR
MR2888AF30G RUBBER FRONT SLICK TIRE(FOR ORI) 30 DEG - 1PR
MR2888AF35G RUBBER FRONT SLICK TIRE(FOR ORI) 35 DEG - 1PR
MR2889AF08G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 8 DEG - 1PR
MR2889AF10G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 10 DEG - 1PR
MR2889AF15G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 15 DEG - 1PR
MR2889AF20G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 20 DEG - 1PR
MR2889AF25G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 25 DEG - 1PR
MR2889AF30G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 30 DEG - 1PR
MR2889AF35G RUBBER FRONT RADIAL TIRE SHAPE-A (FOR ORI) 35 DEG - 1PR
MR2890AF08G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 8 DEG - 1PR
MR2890AF10G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 10 DEG - 1PR
MR2890AF15G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 15 DEG - 1PR
MR2890AF20G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 20 DEG - 1PR
MR2890AF25G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 25 DEG - 1PR
MR2890AF30G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 30 DEG - 1PR
MR2890AF35G RUBBER FRONT RADIAL TIRE SHAPE-B (FOR ORI) 35 DEG - 1PR
MR2891AF08G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 8 DEG - 1PR
MR2891AF10G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 10 DEG - 1PR
MR2891AF15G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 15 DEG - 1PR
MR2891AF20G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 20 DEG - 1PR
MR2891AF25G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 25 DEG - 1PR
MR2891AF30G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 30 DEG - 1PR
MR2891AF35G RUBBER FRONT RADIAL TIRE SHAPE-C(FOR ORI) 35 DEG - 1PR
MR2892AF08G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 8 DEG - 1PR
MR2892AF10G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 10 DEG - 1PR
MR2892AF15G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 15 DEG - 1PR
MR2892AF20G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 20 DEG - 1PR
MR2892AF25G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 25 DEG - 1PR
MR2892AF30G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 30 DEG - 1PR
MR2892AF35G RUBBER FRONT RADIAL TIRE SHAPE-D(FOR ORI) 35 DEG - 1PR
REAR TIRES
MR2888AR08G RUBBER REAR SLICK TIRE(FOR ORI) 8 DEG - 1PR
MR2888AR10G RUBBER REAR SLICK TIRE(FOR ORI) 10 DEG - 1PR
MR2888AR15G RUBBER REAR SLICK TIRE(FOR ORI) 15 DEG - 1PR
MR2888AR20G RUBBER REAR SLICK TIRE(FOR ORI) 20 DEG - 1PR
MR2888AR25G RUBBER REAR SLICK TIRE(FOR ORI) 25 DEG - 1PR
MR2888AR30G RUBBER REAR SLICK TIRE(FOR ORI) 30 DEG - 1PR
MR2888AR35G RUBBER REAR SLICK TIRE(FOR ORI) 35 DEG - 1PR
MR2889AR08G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 8 DEG - 1PR
MR2889AR10G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 10 DEG - 1PR
MR2889AR15G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 15 DEG - 1PR
MR2889AR20G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 20 DEG - 1PR
MR2889AR25G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 25 DEG - 1PR
MR2889AR30G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 30 DEG - 1PR
MR2889AR35G RUBBER REAR RADIAL TIRE SHAPE-A (FOR ORI) 35 DEG - 1PR
MR2890AR08G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 8 DEG - 1PR
MR2890AR10G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 10 DEG - 1PR
MR2890AR15G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 15 DEG - 1PR
MR2890AR20G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 20 DEG - 1PR
MR2890AR25G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 25 DEG - 1PR
MR2890AR30G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 30 DEG - 1PR
MR2890AR35G RUBBER REAR RADIAL TIRE SHAPE-B (FOR ORI) 35 DEG - 1PR
MR2891AR08G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 8 DEG - 1PR
MR2891AR10G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 10 DEG - 1PR
MR2891AR15G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 15 DEG - 1PR
MR2891AR20G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 20 DEG - 1PR
MR2891AR25G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 25 DEG - 1PR
MR2891AR30G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 30 DEG - 1PR
MR2891AR35G RUBBER REAR RADIAL TIRE SHAPE-C(FOR ORI) 35 DEG - 1PR
MR2892AR08G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 8 DEG - 1PR
MR2892AR10G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 10 DEG - 1PR
MR2892AR15G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 15 DEG - 1PR
MR2892AR20G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 20 DEG - 1PR
MR2892AR25G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 25 DEG - 1PR
MR2892AR30G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 30 DEG - 1PR
MR2892AR35G RUBBER REAR RADIAL TIRE SHAPE-D(FOR ORI) 35 DEG - 1PR

mk2kompressor
2008.11.15, 07:23 PM
BLIMEY!!!!!!!!!
you dont mess about lol i know they are good on bri's track,i always found shape tread shape A the best

oopster
2008.11.15, 07:49 PM
Well, I've been doing my homework on mini-z for the past 6 months, so it's about time I get my act in order, plus with the new shop opening next month, I need to get things sorted.

After talking about getting myself an RCP track, I might get one to set up in the corner of the shop after Tom suggest one for the shop. It will most likey just be an L-shape track, as there won't be much space for anything bigger, but it would really only be as a practice track.

Sam's out of hospital now too. He was due to have his op on Thursday, but his surgeon is ill, so his op was cancelled.

mk2kompressor
2008.11.15, 08:31 PM
good luck with the opening,we hope to go brick and mortar eventually:)
let me know about the track and ill sort some for you

oopster
2008.11.15, 08:34 PM
Thanks Matt, I'm actually trying to source it myself for the shop, if you can help with that

575racer
2008.11.16, 04:42 AM
bloody hell sarah you wont need tires for a while! cool about finding rcp for the shop though, i might pop down when you open up, and its a good way of gettting people who wonder into the shop into the hobby too. what parts are you hoping to get?

oopster
2008.11.16, 11:17 AM
Still need to do my homework on that, but to start, it'll mainly be the parts that break the most, that need replacing most, like tyres, motors etc. Just about to order some PN Hfay motors.

kryten
2008.11.16, 11:20 AM
I think Bri still has some HFAY motors left.

mk2kompressor
2008.11.16, 01:40 PM
i got 10 left too...

Programmers
2008.11.16, 04:45 PM
kick-awesome, were running this in 2 man teams like last time?
Not sure to be honest. We had a discussion last meet and come to the conclusion that one man is best. However, me and my dad are going to be a team.

Any other teams are welcome too... I'd say, no more than two people because it's only a short race.

575racer
2008.11.16, 05:21 PM
me and jayce will be running together then, providing he hasnt changed his mind...?

mk2kompressor
2008.11.16, 05:52 PM
will you guys still be running the larger hfay track?

oopster
2008.11.16, 07:37 PM
i think that's still the plan matt

mk2kompressor
2008.11.16, 07:46 PM
cool,might pop up and give you all some competition:p

kryten
2008.11.17, 10:24 AM
Sounds good Matt! You bringing the whole club?

mk2kompressor
2008.11.17, 04:00 PM
probs just me and nobby,ill ask the others at our meet:)

Neomax
2008.11.24, 07:00 PM
I'll be posting any dates soon that i WONT be able to make for Dec, got Christmas dinners and stuff with family so hopefully the dates wont clash.
One date i know is the 14th, that is the In-Law Christmas dinner, so that date is off for me :(

oopster
2008.11.26, 01:44 PM
Due to a ****-up with my email that I've only just found out about, the part I ordered from Cain won't be here in time for the next meet (assuming the next meet is the second sunday in the month).

This also means the tyres I ordered won't be here either, but I've altered my order so now I've ordered 2 of everything, if there's a tyre that more popular that I should order more of then please tell me.

Lastly, PN don't do that HFAY motor anymore. I'm looking into what motor to get instead, but please let me know if you do. I've asked Cain to send me 6 motors that he thinks will be legal under HFAY rules.

briankstan
2008.11.26, 01:50 PM
Due to a ****-up with my email that I've only just found out about, the part I ordered from Cain won't be here in time for the next meet (assuming the next meet is the second sunday in the month).

This also means the tyres I ordered won't be here either, but I've altered my order so now I've ordered 2 of everything, if there's a tyre that more popular that I should order more of then please tell me.

Lastly, PN don't do that HFAY motor anymore. I'm looking into what motor to get instead, but please let me know if you do. I've asked Cain to send me 6 motors that he thinks will be legal under HFAY rules.

the HFAY motors have never been available from PN. I have them available though and can get you what you need. Let me know the quantities that you need and we can work something out so your racers don't have to order them from the states.

FYI, the only motors that are HFAY legal are the Kyosho Stock and the HFAY Spec.

mk2kompressor
2008.11.26, 03:28 PM
i still have plenty in stock too...

kryten
2008.11.28, 07:48 PM
Are we any nearer to a confirmed date yet? Pref not the 7th for me,all other sundays are fine.

oopster
2009.08.22, 06:20 PM
Just wondering, are we doing another 3 hour race this year?