PDA

View Full Version : xtal holder on mzm/ol pcb


kryten
2008.12.17, 11:55 AM
Can the xtal holder on the ol/mzm pcb be removed and resoldered onto the other side of the board,so it is on the same side as the small black box?

HammerZ
2008.12.17, 02:48 PM
You can desolder it, but I think an easier way is to open up the crystal holes in the socket bottom side. On the backside, This way you can plug the crystal in from the back side. This way you don't overheat the board changing it over.

kryten
2008.12.17, 05:17 PM
Much better idea,thanks! i'm not the best solderer either.:)