PDA

View Full Version : Convesion help!


MINIz guy11
2008.12.28, 02:17 PM
Hello, I'm having trouble installing my MR-01 board onto the MR-015. The main problem is the 2 white wires (power switch wires) are getting in the way of letting the board cover close. How do you guys have those wires placed to get a perfect fit?

http://i104.photobucket.com/albums/m191/MINIzguy/MR-015/C001.jpg

Also, I should shorten those power wires and install the more modern battery terminals, right? To screw them in, I put the terminals on the outside of the chassis and take a screw going through into the batter terminal holders on the insides, right?

Pictures of a complete car would help greatly!

MINIz guy11
2008.12.28, 10:59 PM
Anybody at all?

Just a simple picture of an AM board installed on a MR-015 chassis is all I need! I've searched and couldn't come up with the proper pictures I need!

k_bojar
2008.12.29, 07:31 AM
easiest thing I would say would be to notch the board cover with an exacto knife

simple and painless ;)

monkey19
2008.12.29, 07:44 AM
easiest thing I would say would be to notch the board cover with an exacto knife

simple and painless ;)

Yup thats what I would do, once notched out the cover will fit snug.

MINIz guy11
2008.12.29, 09:52 AM
Alright then, notching it is!

I was just looking for the exact stock configuration but if that won't work, then I'll notch it.