PDA

View Full Version : wtb: mr01 parts and a good used 96mm bod


rickyb
2009.01.31, 08:08 AM
rick brown
salisbury,mass
pm,thread,paraskoulakis@yahoo.com
wtb:mr01 parts and 94mm bod.

need h plates!!!!!
i would also like to know what other parts you may want to get rid of so i can keep this car going. also looking for a decent used 94mm bod. thanks for your help!!!!!!!!!:cool:

okoye
2009.01.31, 08:34 AM
i have an altezza i know its not 96 nvm its not used its mint

cowboysir
2009.01.31, 08:44 AM
It doesn't really matter which body you look for since either 94mm or 98mm get dremelled out to fit 96mm wheelbases...it's an in-between desing from reflexracing and not a standard from kyosho.

you can have an iWaver Enzo of mine...it's ugly but bombproof.:D

EMU
2009.01.31, 10:30 AM
There is no such thing as 96mm for MR01. There are no 96mm H-plates. Its either 94 or 98mm.

rickyb
2009.01.31, 10:52 AM
i run an mr-01 with a standard o1 h plate and an 02 mm pod wich the 96mm bodys fit, unless i'm mistaken i have used the warnstiner, 350z. are these 94mm? if so im looking for a 94mm bod.:confused: but i need the standard 01 h plates. (i don't care if they are plastic,graphite etc.....)

Draconious
2009.01.31, 10:58 AM
All Kyosho Mini-Z Racer bodies are 4mm increments... 86 90 94 98 102 106
Overlands are 5mm increments... 95 100 105 110

rickyb
2009.01.31, 05:59 PM
the body i am looking for is a 94mm body used 10-15$ scrapes etc. o.k. just please no front end cracks. just looking for something for the newbies to beat up!:D

cowboysir
2009.02.01, 02:41 AM
replied to your pm but the Enzo body is 98mm:cool:

rickyb
2009.02.01, 07:10 AM
thanks!!!!

MantisMMA
2009.02.01, 10:39 AM
There is no such thing as 96mm for MR01. There are no 96mm H-plates. Its either 94 or 98mm.


reflex makes 96mm h plates in hard and soft!! i run that setup and it is the best handling combo so far.

rickyb
2009.02.01, 12:46 PM
were can i get those? mr-01?

rickyb
2009.02.02, 08:11 AM
bump! :confused:

rickyb
2009.02.02, 06:11 PM
anyone have any 01 h plates? didn't find any at reflex,atomic,kennon? do they not make these anymore?

Draconious
2009.02.02, 09:25 PM
If they dont make them any more, I guess I should start cutting carbon H plates on the laser at school :)

rickyb
2009.02.03, 08:39 AM
that would be cool if i had the means to do so. i've been a graduate for quite some time now,and even so my school never had that kind of stuff!:eek:

dvsstrike
2009.02.04, 08:05 AM
again rick. i may have more plates for you.let me check
tim

rickyb
2009.02.04, 10:54 AM
hey whats up? i didn't realize this was you! i had you mixed up with another guy i met at crottys track.:confused: hows the awd car? you guys been racing? i'm still trying to figure out when crottys racing again. you should come up. i'll let you know when there racing...thanks
rick

Marianitem
2009.02.06, 03:31 PM
Hey Rick, i PMīd you about H-plates for 01. You can check ****** for example. There are H-Plates in stock at many asian stores. Iīve just bought a set for myself. I hope nobody get so hungry to buy the whole stock at once... I just bought 1 set.