PDA

View Full Version : Problem with my 2PL


flamefox98
2009.02.20, 02:09 PM
Here's the problem, my fet was fried so i need to replace it, and after that's done, and everything is put back into place, the steering is all messed up. when i start the Tx (Futaba 2PL) and the car, at no trim, the front wheels steers all the way right. Even if i put the steering trim to L25 (which is the max) it is is still tilted slightly to the right. Originally i thought it have to do with the servo or the board, so i try it on another car, but it's the same thing.....
Do anyone know what the problem may be?

acerpower
2009.02.20, 04:17 PM
i had the same thing happen with my 2pl on both of my cars.
you have to adjust the servo with the adjuster on the pcb.
on the mr-02, it's located under the sticker of the pcb cover, on the ma-010 it's on the bottom of the pcb(it's a p.i.t.a.!)

rc_bam226
2009.02.20, 04:46 PM
i had the same thing happen with my 2pl on both of my cars.
you have to adjust the servo with the adjuster on the pcb.
on the mr-02, it's located under the sticker of the pcb cover, on the ma-010 it's on the bottom of the pcb(it's a p.i.t.a.!)

What does it look like? Is it a pot with a philips head socket?

acerpower
2009.02.20, 06:35 PM
What does it look like? Is it a pot with a philips head socket?
yes, that should be it.

rc_bam226
2009.02.20, 07:49 PM
yes, that should be it.

Thanks man.

flamefox98
2009.02.21, 02:09 PM
i had the same thing happen with my 2pl on both of my cars.
you have to adjust the servo with the adjuster on the pcb.
on the mr-02, it's located under the sticker of the pcb cover, on the ma-010 it's on the bottom of the pcb(it's a p.i.t.a.!)

Thanks, it works fine now!