PDA

View Full Version : Can anyone post hi resolution pics of top and bottom of a 2.4 board?


ianc
2009.02.22, 12:25 PM
Hello there,

I've acquired a 2.4 board with no wires or FET's on it; just a bare board.

If someone has some good clear high-res pics of both the top and bottom of a 2.4 board as well as perhaps some showing how the pot and servo motor are wired, I could get to work without having to disassemble one of my existing cars to see how things are.

TIA,

ianc

briankstan
2009.02.22, 01:24 PM
here you go, I hope this will help out.

ianc
2009.02.22, 09:22 PM
Thanks Brian, that makes life a lot easier. I appreciate it!

ianc

Skv012a
2009.02.22, 10:13 PM
Any reason the 2 numbers under 3010 on FETs are different on top and bottom? Forward and reverse or something else?

ianc
2009.02.22, 10:31 PM
Maybe just different manufacturing batch #'s?

ianc

Skv012a
2009.02.22, 10:48 PM
But consistently a pair on top and a pair on the bottom? Doesn't sound like kyo would split the batches in 2 mid-assembly.

Draconious
2009.02.22, 11:39 PM
I have no clue why... can only guess that if the soldering machine that soldered SIDE A was loaded with a batch of fets, and then the soldering machine that soldered SIDE B was loaded with another batch or spool of fets its very likely they would have different production codes.