View Full Version : It's low and it's slow!

2009.04.09, 04:25 AM
I've had a Toyota Aletzza body that I've wanted to use for a while now. Then last night, my dad gave me an MR01 and I figured I couldn't make it race worthy, so I made it cruise worthy... :rolleyes:


I lowered it by 5mm up front and 4mm at the back to get it level. To get the wheels so deep in the arches, I had to use a narrow wheel on the back and a negative offset on the front. They're also inch-up's which helps.


I then used an Eco motor that I figured I would never use again and tuned the steering in to stop rubbing on the light fixtures when turning. Finally, I blacked out the windows with some tape. :D

And walla!