PDA

View Full Version : settings for the mini-z 2.4ghz


Pedro silva
2009.05.20, 04:25 PM
hello

I recently bought a radio Ko Propo EX1 UR

My old radio was a sanwa m11 is a little different from KO propo
I have some doubts?

wish is the mode i use for mini-z 2.4ghz normal mode or in the faster modes such as Ultra response or advanced response ? because the sanwa m11 do not have this modes.

what are the settings that are used in the mini-z board for the Ko propo radio , as v-inertia , d-band ,neutral, dump , d-freq , gain , speed, pnch.


Thanks in Advance.
Best regards.
Pedro silva

MantisMMA
2009.05.21, 02:52 PM
i use adv but it depends on the driver


the board is not KO specific as fas as settings go but for stock racing i use (4) for inertia, default for d band, narrow nuetral, default for dump, far left on d-freq(most torque), and default for the rest. hope this helps!

HaCo
2009.05.21, 03:06 PM
For Tx settings, have a look here: http://www.kopropo.com/america/index.php?option=com_content&task=view&id=109&Itemid=153

Pedro silva
2009.05.21, 04:04 PM
Hello

Thanks for the help .

Best regards.
Pedro Silva

herman
2009.05.21, 11:56 PM
For Tx settings, have a look here: http://www.kopropo.com/america/index...109&Itemid=153
funny i was just looking at that just yesterday...