PDA

View Full Version : MA010 2.4 Ghz trouble


remy
2009.06.09, 06:00 AM
Hello,
I've got a MA010 2.4 with an Atomic stock R evolution and a 3PK. I race on a carpet track.
After about 1/2 an hour of racing I lost the control of my car and I've to do again the programmation with the 3 PK and then it works again. But it happens very often.

Do someone know this problem ?

Best regards

kryten
2009.06.09, 07:17 AM
I used to have a similar problem with the helios,it was down to low TX batteries.

remy
2009.06.10, 12:39 PM
Thank's for this information. Does it mean that the MA010 is more sensible to the Tx tension than the MR02 ?

Best regards

kryten
2009.06.10, 12:46 PM
When i had the problem,both my mr02 and ma010 did this,only my f1 stayed paired for some reason.

remy
2009.06.10, 02:19 PM
What have you done on your Tx ? Do you use specific batteries ?

Best regards

kryten
2009.06.10, 02:21 PM
I dont have the TX anymore,sadly.I stopped using rechargeables and used chuckaway ones instead.Look for hi power digi camera ones they last well.The TX is lighter too with chuckaway batts. :)
I was using duracell 2600mah batts,but after a few charges,they only lasted a few hours before this problem would occur.Maybe cycled batts would work better,as i never had the kit to do this,just to recharge them.

remy
2009.06.11, 05:10 AM
Hello,
Thank's a lot for these informations, I'll test your solution.

Best regards