PDA

View Full Version : Soldering FET's what should i do


70hemicharger
2009.08.27, 03:16 PM
hey all i burnt threw a FET the other day and i have a spare main board with good FET's on it (this is on an evo xmods by the way) i just was wondering what i should do i went and bought a 15 watt sodering iron with a long fine tip (i heard the lower the watt the better) and a small geage soder to do the job plus i have the magnafing glass station to see all the fine stuff. but dose any one have a how to or pictures with step by step FET replacement and advice will help too. thanks

ianc
2009.08.27, 03:54 PM
Try here:

http://www.mini-z-guide.com/FETInstall.htm

It's for Mini-z's, but the procedure should be similar. Thanks again to Ben for his great site!

ianc

70hemicharger
2009.08.28, 05:47 AM
Try here:

http://www.mini-z-guide.com/FETInstall.htm

It's for Mini-z's, but the procedure should be similar. Thanks again to Ben for his great site!

ianc

thanks ian this is great really helpful