PDA

View Full Version : MA-010 6WD, true SIX WHEEL DRIVE!


civilian
2009.10.03, 08:36 AM
inspired from this:

http://img11.imageshack.us/img11/8213/354n.jpg

so i decide to make this:

http://img38.imageshack.us/img38/3067/ma0106wd20.jpg
http://img29.imageshack.us/img29/6636/ma0106wd19.jpg

how it works?
there you go:

for the front, nothing changed, just using standart steel shaft and gear:

http://img401.imageshack.us/img401/7514/ma0106wd14.jpg

i'm using small steel shaft from Tamiya 4WD and cut it.
then cut half standart 8T gear, plus pair of metal ballbearing.
1st version for rear shaft, i put chromed brasstube for shaft cover, and to hold the ballbearing.
but it doesn't work very well, the tube and bearing always fall.

http://img203.imageshack.us/img203/7274/ma0106wd09.jpg

so i change it to a heatshrink.
work very well!

http://img29.imageshack.us/img29/1577/ma0106wd16.jpg



PS:
this is NOT a racetruck.
the guys here use my truck for "street race safety car" plus towing car.
:D:D:D

civilian
2009.10.03, 08:39 AM
i change the universal joint, coz this is what's happen if using plastic standart:

http://img251.imageshack.us/img251/5426/ma0106wd01.jpg

and cup joint with aluminum too ofcoz:

http://img203.imageshack.us/img203/1331/ma0106wd03.jpg

why i change it? coz too much torque!
coz i use my own winding motor + neo magnets.
plus i also locked the diff shaft gear :p

still unfinished, but hopefully soon!

http://img188.imageshack.us/img188/9438/ma0106wd17.jpg

BTW, this is the video for "real proof" 6WD:

http://www.youtube.com/watch?v=xFVHsN95LWI

Eman
2009.10.03, 11:24 AM
Looks good.

Sponge
2009.10.04, 02:11 PM
That looks pretty cool! :D

Good luck with the project :)

Knacki
2009.10.04, 05:02 PM
Isn't it a kind of....crazy :D
Good luck!
I like stuff like that ;)

J-Milz
2009.10.08, 04:22 AM
Me like it alot!!!! Lol. I have a spare awd let's do it!

MXMRCR
2009.10.08, 04:39 AM
that is rad!, i like it a lot too and can't wait to see it finished, good work.

btw, is the inspiration pic from the first madmax?

saaboteur
2009.10.08, 05:55 AM
btw, is the inspiration pic from the first madmax?

I think it is from the last "the fast and the furious".

civilian
2009.10.09, 01:12 AM
i have lotsa work to do.
no work no money, no money no RC!
hahaha.

so i will need more time to finish this lil monstro.
i already make the chassy longer.
using 3racing plastic 98mm extension [the cheapest available in the market!].
the shell is already painted flat black.
the photos soon.

i need more time to do things.
or should i buy the magazine? [TIME Magazine] :D:D:D

BTW, yes! sab is rite, i took the liberty to copycat the chevy crew cab from newest Fast and Furious movie.
:p

civilian
2009.10.27, 01:51 AM
almost done!
small rectangle CD box will do perfectly!

http://img8.imageshack.us/img8/2245/dsc00560yh.jpg

cut here and there, power glued it, epoxy glued it, then:

http://img193.imageshack.us/img193/976/dsc00562t.jpg

almost finish, testing strength:

http://img193.imageshack.us/img193/5418/dsc00564gg.jpg

http://img196.imageshack.us/img196/6935/dsc00566pn.jpg

26.3grams of total weight w/o windshields...
almost done!
hang in there!!! :p

civilian
2009.10.31, 04:44 AM
the painting is finally finish!

not too good actually, but is better than nothing.
i'm not a good artist but i know what i can do :p


http://img249.imageshack.us/img249/3913/img0223w.jpg

http://img692.imageshack.us/img692/2270/img0219v.jpg

upper angle:

http://img503.imageshack.us/img503/9181/img0217d.jpg

closeup:

http://img267.imageshack.us/img267/7848/img0221o.jpg

it even have a tiny window on it:

http://img692.imageshack.us/img692/5732/img0222n.jpg

almost finish!
just windshields and antenna position!


http://img692.imageshack.us/img692/3173/img0220w.jpg

:D

okoye
2009.10.31, 06:40 AM
looking good man. adding that bed was a great idea have you tried adding a 86mm car on the back?

MXMRCR
2009.10.31, 08:45 AM
amazing!, i've seen alot of good projects over the years and this is def in my top 3, very well done.

are you gonna put some wheel arches on the bed?

civilian
2009.10.31, 11:44 AM
looking good man. adding that bed was a great idea have you tried adding a 86mm car on the back?

just like the 2009 Fast and Furious!
the diff is in the movie they use Chevy truck.
mine is Humvee truck...
86mm car?
put on the bed or tow it?
sorry, my english is not really good :(

amazing!, i've seen alot of good projects over the years and this is def in my top 3, very well done.

are you gonna put some wheel arches on the bed?

naaah, i think i will add NoS tank, or better NoS tanks? :D


thanks for stop by and put suggestions guys!:D

Tjay
2009.10.31, 01:17 PM
very nice! I like the paint and chrome wheels as well!

civilian
2009.10.31, 02:51 PM
oh BTW in case anyone wanna know what i been use:

2x Kyosho plastic rear gear box set [both are broken, but i know how to fix it]
1x double bearing motortube [dunno the brand, a friend give to me to build this :p]
1x auldey magnet [chromed one almost as strong as Neo Magnet]
1x own wind up hi-torque motor
1x short steel shaft [cut off from tamiya mini4wd]
2x standart tamiya shaft gear 8t
2x small ballbearing [again, a friend give to me for this mini monster :p]
12x 3Racing ball bearing for all 6 wheels
6x Kyosho diff gear bearing
4x 3Racing alum cup joint for mid and rear
4x TopCad alum universal joint for mid and rear
1x 3Racing 15Tpinion gear
1x 3Racing chassis extension set 98mm
1x 3Racing 31T 98mm spur gear
2x dish type ATOMIC front wheel offset 1.5
4x dish type ATOMIC mid/rear wheel offset 2.5
2x Atomic front tires [used, but still have good grip, give by friends]
4x Atomic rear tires for mid/rear [used too, grip too, from friends too :D]
1x old rectangular CD casing for the back [bed?]
others are just cyanocrylate glue [small tube power glue! :D], epoxy glue, cutter, knives, pliers etc...

arch2b
2009.10.31, 03:47 PM
i have to ask, what is it like to drive?

AFY2600
2009.11.01, 09:51 PM
badass!!!!

okoye
2009.11.02, 07:55 AM
on the bed i think you can tow as well you have enough power to do so.

maybe make an alternate bed with a tow rig setup

civilian
2009.11.02, 09:27 PM
i have to ask, what is it like to drive?

what is like?
It's not fast, but so much torque to pull or push.
overall... not bad to make people turning their head :D:D:D

takman
2009.11.28, 03:45 PM
Your Mad-Maxmobile pickup is sweet.
If you want to do another crazy project why not make a MAN or Tatra 8x8 truck where the front 4 wheels steer.
It would be a different scale but sweet nonetheless.
If anyone can pull it off it's you.

Cherub1m
2009.12.01, 09:25 AM
Nice work man

civilian
2009.12.15, 02:46 AM
Your Mad-Maxmobile pickup is sweet.
If you want to do another crazy project why not make a MAN or Tatra 8x8 truck where the front 4 wheels steer.
It would be a different scale but sweet nonetheless.
If anyone can pull it off it's you.

i have difficulty to find the tyres like those true monster...

monkey19
2009.12.15, 05:57 AM
great job, well done.

boohoo
2009.12.15, 07:12 AM
as said in our pm`s here is my version of a 6wd

http://i252.photobucket.com/albums/hh14/boohoo_2008/291120091601.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/291120091602.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/291120091603.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/291120091604.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/021220091610.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/041220091618.jpg

boohoo
2009.12.15, 07:14 AM
more pics

http://i252.photobucket.com/albums/hh14/boohoo_2008/061220091630.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/061220091631.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/061220091632.jpg

as it sits right now waiting for parts to come going for the bashed look

http://i252.photobucket.com/albums/hh14/boohoo_2008/141220091639.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/141220091641.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/141220091649.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/141220091645.jpg

http://i252.photobucket.com/albums/hh14/boohoo_2008/141220091646.jpg

civilian
2009.12.15, 01:50 PM
wow, low rider version of 6WD!!!

boohoo
2009.12.15, 02:36 PM
wow, low rider version of 6WD!!!

thanks iam glad you decided to build the first 6wd which gave me the insparation to build mine. and it wouldnt be a lowrider without the rims to go with it can only find two at the moment

http://i252.photobucket.com/albums/hh14/boohoo_2008/151220091651.jpg

civilian
2009.12.15, 03:36 PM
with that kindda rims, i imagine you will add some micro servo and make it hispanic kindda low rider!
that's koooL!!!

boohoo
2009.12.16, 03:44 PM
with that kindda rims, i imagine you will add some micro servo and make it hispanic kindda low rider!
that's koooL!!!

that would be cool but not for me. finally go my stuff to make it 6wd heres a quick vid of it working also change the chassis to 2.4ghz

http://i252.photobucket.com/albums/hh14/boohoo_2008/th_16122009017-1.jpg (http://s252.photobucket.com/albums/hh14/boohoo_2008/?action=view&current=16122009017-1.flv)

civilian
2009.12.22, 10:50 PM
so, how's the 6 wheels low rider going?

boohoo
2009.12.24, 12:17 PM
so, how's the 6 wheels low rider going?

its going ok. iam changing it alittle iam trying to find two sets of centreline alloys but no-one has any they want to sell these are the wheels

http://i252.photobucket.com/albums/hh14/boohoo_2008/250920091165.jpg

civilian
2010.03.05, 10:55 PM
custom body, custom tx!

http://img689.imageshack.us/img689/8287/txfinal01.jpg

everybody wanna try my car.
since i never lend my esprit3 to nobody, then i decide to make that!

please give opinio guys.

works well with all AM mini-z, some other AM mini/micro cars recievers too.
but not really work well with LOSI recievers :(

J-Milz
2011.07.14, 11:38 PM
I'd love to see Dr Kustom do a 6wd car!