PDA

View Full Version : doubt about mr-03 LM motorpod


gomez
2010.01.24, 09:17 AM
anybody knows if Atomic L.C.G. Motor pod for mr-02 LM fit the 03 LM ? does the down holes match ?

p.s. - thanks manufactures for making alot of tires choices for LM :D.current are kyosho 20 , 30 ,40 front and rear

B-main
2010.01.24, 09:30 AM
down holes? the four holes were the h plate bolts to the pod?.the h plate to pod holes are the same on the 02 and 03 .the h plate to the main chassie holes are different .

EMU
2010.01.24, 02:16 PM
If you replace the wheels with the new Mantis Werks wheels, they have a 19mm front wheel that will accept standard front tires, with the same outside diameter as LM tires.

You can use an MR01 motormount on an MR03 if you want. Motormount screw locations are identical on all MR cars. How the t-plate mates to the chassis is different, but to the motormount the same...

Atomic-USA
2010.01.24, 09:46 PM
Yes it works. I am using LM mount on MR03.

gomez
2010.01.25, 07:52 AM
If you replace the wheels with the new Mantis Werks wheels, they have a 19mm front wheel that will accept standard front tires, with the same outside diameter as LM tires.

can i have link for this wheels please. did u used it already ? cause thinking on this, i think that front will be lower and back a lot higher.
it would be great if someone make an adapter to fit standard mini-z tires into LM not only front but also rear.

MINI-D
2010.01.25, 09:16 PM
http://www.reflexracing.net/proddetail.asp?prod=MW001

D

gomez
2010.01.26, 07:20 AM
so , can i use both rear and front on my mr-03 LM ?