PDA

View Full Version : ASF Manager questions


Mike Keely
2010.03.21, 07:31 PM
I saw someone had the cable to hook up to the MR03. What are some of the things that guys are changing from the stock setting from the factory or is it really not worth getting because the factory setting are the best way to run the car?

EMU
2010.03.21, 08:09 PM
On the MR02 I changed a bunch of settings. I have changed a couple with one of my MR03's, and left the other stock. I slowed down the servo, and reduced the drag brake (added Virtual Inertia since this car is a 70t car, and there is a lot of drag brake). The MR02 ASF had default Virtual Inertia set to 3 (1-5, 5 being off) MR03 comes with Virtual Inertia set at 5. This was the biggest difference, and also how the servo centers. I felt that at stock, the servo did not center fully, and was very sensitive. I wanted the car to center more like my MR02, and to be a little slower so it is easier to drive at the limit.

I am waiting on the card for the handheld programmer (ordered last week), bacause I dont take my computer to the track with me, I cant really mess around with the settings that much at home when bench testing. Once I get it, I am going to play around with some of the settings and see if I can dial in the cars a little more.

mleemor60
2010.03.21, 08:15 PM
Eugene, What is the part # for the 03 setting card for the hand held unit if you please?

EMU
2010.03.21, 08:36 PM
Eugene, What is the part # for the 03 setting card for the hand held unit if you please?
This is for the card alone. I can search for the one with the handheld as well if needed.
KO-61025
http://www.egrracing.com/shop/mr03-setting-card-p-3702.html

Full handheld with card is;
KO-61024

Both are out of stock at a lot of places... I found mine at Pro-Shop Futaba, however, it is very difficult when you cant read Japanese (I cant).

mleemor60
2010.03.21, 08:52 PM
I already have the handheld unit with an 02 setting card. I just need the compatible card for the unit that works with the 03. so the crd alone is
KO-61025?

EMU
2010.03.21, 10:20 PM
I already have the handheld unit with an 02 setting card. I just need the compatible card for the unit that works with the 03. so the crd alone is
KO-61025?
That is correct...

mleemor60
2010.03.22, 07:22 AM
Thank you very much. Once again you are a gentleman and a scholar. And I as usual am a bad judge of character.

Mike Keely
2010.03.31, 07:44 PM
How much does the programmer cost?

mleemor60
2010.03.31, 08:13 PM
About $75.00 from KO on line