PDA

View Full Version : Yasuji's 2010 RCX GT MOD set up


yasuji
2010.03.27, 02:26 PM
Yasuji's 2010 RCX GT MOD set up:
MR-03 PN Racing TEST CAR McLaren F1 GTR
QUALIFIED 4TH
MAIN 1ST
FAST LAP 9.XX

POWERPLANT:
FETS :ANO113
MOTOR: PNWC 33T FINAL DRIVE: 64p 9/53
BATTERY:R1 WURKS 990

FRONT END:PROTO
PN AA ARM YELLOW SPRINGS
1DEG CAMBER 1.08 GAIN
TOE OUT
+2 19MM PN HGF DISH WHEELS
PN 15 DEG X PATTERN

REAR END:PROTO
98 LCG MOTOR POD PN Racing Mini-Z Tri Damper System
PN Racing Mini-Z MR015/02 Dual Spring Center Shock Set
GREY MAIN SPRING SILVER REBOUND SPRING
PN Racing Mini-Z MR03 MM G10 Fiber Glass T-Plate #5
PN Racing Mini-Z MR03 High Clamp Force T-Plate Mount
+3 20MM PN HGR DISH WHEELS
PN 6 DEG RADIALS
Sorry for the poor pics i took with my phone
I think that is all of it.....

hrdrvr
2010.03.28, 04:28 AM
Thanks for sharing the set up G! That was one of the few races I caught on the live feed. You and TJay both had great runs! It was cool to see you rocking a non-pan car. Is it something we may see again in the future? "D

pedrocamp
2010.03.28, 06:45 AM
What are HGF and HGR wheels? Are the 19mm available now or are they protos?

Felix2010
2010.03.28, 09:20 AM
Thanks for posting your setup Grant. It's always cool to see what the top guys are running.:D

One question though, in one of the photos of the front-end of your chassis, it looks like the front wheels are Wides? I see that they are proto 19mm wheels, but did you run Wide (11mm) wheels all-around, or the standard front/Narrow(8.5) and Rear/Wide(11mm). Thanks for the verification!:)

Cool car!

LadyFox_VT24
2010.03.28, 11:18 AM
Grant thanks for posting your setup. Your crazy fast men!:D

yasuji
2010.03.28, 11:40 AM
Thanks for sharing the set up G! That was one of the few races I caught on the live feed. You and TJay both had great runs! It was cool to see you rocking a non-pan car. Is it something we may see again in the future? "D

i think i will run both....pancar....and gt mod.....understand that i still run 98 mm wide offset....lol....and with that wing on the back.....it drives almost like a pancar....:D

yasuji
2010.03.28, 11:44 AM
What are HGF and HGR wheels? Are the 19mm available now or are they protos?

i am not sure if "HG" /"HIGH GRIP/HIGH GRADE"Is what they will be called but this is what i call them...it is still a proto in its final stages.....i love these wheels and the deep dish look as well!;)

yasuji
2010.03.28, 11:46 AM
Thanks for posting your setup Grant. It's always cool to see what the top guys are running.:D

One question though, in one of the photos of the front-end of your chassis, it looks like the front wheels are Wides? I see that they are proto 19mm wheels, but did you run Wide (11mm) wheels all-around, or the standard front/Narrow(8.5) and Rear/Wide(11mm). Thanks for the verification!:)

Cool car!

front narrow rear wide:D

yasuji
2010.03.28, 11:50 AM
Grant thanks for posting your setup. Your crazy fast men!:D

thank you....u r a CRAZY FAST WOMAN!....GOOD JOB @ RCX!
ps...sorry for all the times i hit u in practice;)lol