PDA

View Full Version : out door racing


Pages : [1] 2 3

lilmj44
2010.04.17, 11:46 AM
out door racing

machgo5go
2010.04.17, 12:10 PM
out door racing
It's raining & little tires can not handle the tarmac!

Davey G
2010.04.17, 12:32 PM
To elaborate on the original post, Majs Hobby Shop will have an offroad track in about 2 weeks. The wood chips have been pulled up and dirt will be delivered soon (thanks JUNIOR). We will be running Traxxas Mini slashs/mini revo's, Associated 18t series, Losi Mini lst's, etc. This track is pretty much for 1/16th scale vehicles and smaller. We tested it out last night with a temporary layout with the dirt that is currently there, and it was a blast. Sean ran his SC18, I ran my mini LST2 and Junior ran his Mini Slash. Majs hobby shop sold a total of 5 mini slashes last night just because of the exhibition that was put on through out the night. Full schedule, pics, and video's to follow.

bermbuster
2010.04.17, 09:54 PM
Today I stopped by with Frankie we had a few 1/16 1/18 scales with us.
Sean, Rob, Jimmy and Alex were running......Maj brought out the BMX jump and it was FUN.....
Cant wait for the jumps whoops and berms....
afterall Im The Bermbuster...:cool:

ROBG
2010.04.17, 11:03 PM
today was certainly a blast. i had my bone stock brushed 16th scale slash running on basically an outline of a technical layout with a dirt wood chip mix but it was a blast none the less. we all had that little kid getting a sick new present feeling. i cant wait till the clay is delivered and we start really tuning these things. :cool:

machgo5go
2010.04.17, 11:12 PM
today was certainly a blast. i had my bone stock brushed 16th scale slash running on basically an outline of a technical layout with a dirt wood chip mix but it was a blast none the less. we all had that little kid getting a sick new present feeling. i cant wait till the clay is delivered and we start really tuning these things. :cool:
You guys were having lots of fun playing in the dirt. I finally saw JR. putting good use of Mikey in his new career of raking!

lilmj44
2010.04.18, 12:42 AM
lol... very funny but it was fun lol!!!!!:D:D.....

Mike Keely
2010.04.18, 09:34 AM
I have a M18 that I am not running anymore. Would all of the radio equipment and batteries work for one of these mini trucks?

bermbuster
2010.04.18, 11:54 AM
I have a M18 that I am not running anymore. Would all of the radio equipment and batteries work for one of these mini trucks?

Pretty much.....
you could drop it into an M18T or the RC18 series(FT kits)....
for the larger vehicles the electrics maybe too small....

bermbuster
2010.04.18, 11:57 AM
If the clay/dirt mixture can be hard packed w little or no bumps we definitely could race overlands and mini monsters....:D

lilmj44
2010.04.18, 07:13 PM
the new layout tht we did today was awsome on the outdoor track:):)

ROBG
2010.04.18, 09:18 PM
this was just the perfect day weather was great and we all pitched in and got the job done. once the clay is down it will be perfect. the sc18 was even able to be ran without any problem, just imagine when its complete. everyone should be participating in outdoor racing. :cool:

bermbuster
2010.04.18, 09:44 PM
this was just the perfect day weather was great and we all pitched in and got the job done. once the clay is down it will be perfect. the sc18 was even able to be ran without any problem, just imagine when its complete. everyone should be participating in outdoor racing. :cool:

Too bad i couldnt make it....
I did work on our trucks though....
we will have 2 Detta ST's
2 RC18's
and our mini erevo....

Im waiting on the soon to be released RC18t/b2 FT kit.....

HINT....Frankie asked for a BIG jump on the back straight....HINT

bermbuster
2010.04.18, 09:46 PM
Im thinking my eazy up will look good on the back roadway......
keep us kool and close to the action and in the shade....:cool:

EMU
2010.04.19, 12:42 AM
All this talk, with no pictures :rolleyes:

What days are you guys planning to race? I would love to see some videos, or get out there and see it for myself :p

bermbuster
2010.04.19, 05:46 AM
All this talk, with no pictures :rolleyes:

What days are you guys planning to race? I would love to see some videos, or get out there and see it for myself :p

We are waiting for WKR excavating Team to do its A main work on the
track before we post any pics.....:D

kwikvdub
2010.04.19, 11:51 AM
It was lot's of fun running JR's and Rob's Slash's around. The set-up's were out of the box and the handling and speed was awesome!!........ Put a HUGE smile on my face.:D...... I've never really ran off-road before, but after trying it, I'm so in!!

........ Very good day of racing on Sat.

....... See you all soon!;)

ROBG
2010.04.19, 12:21 PM
It was lot's of fun running JR's and Rob's Slash's around. The set-up's were out of the box and the handling and speed was awesome!!........ Put a HUGE smile on my face.:D...... I've never really ran off-road before, but after trying it, I'm so in!!

........ Very good day of racing on Sat.

....... See you all soon!;)

i can't wait for you to try out the track when it's complete. we got down to the bare bone dirt and it was super fun, my brains going to explode once we mold this clay.:eek:

koopal
2010.04.20, 07:43 PM
1/16 Slash @ MHS

http://www.youtube.com/watch?v=vdQRIT5QgT4

EMU
2010.04.20, 08:19 PM
Thanks for the video, looks like there is a lot more room than I had thought. Should make for some great races. Also looks like you could drive from inside when it gets cold. Only the marshalls will have to suffer ;)

egonzalez
2010.04.20, 08:27 PM
Thanks for the video, looks like there is a lot more room than I had thought. Should make for some great races. Also looks like you could drive from inside when it gets cold. Only the marshalls will have to suffer ;)

LOL.... :eek:

machgo5go
2010.04.20, 08:32 PM
Thanks for the video, looks like there is a lot more room than I had thought. Should make for some great races. Also looks like you could drive from inside when it gets cold. Only the marshals will have to suffer ;)
Drive Thru Windows, so cool!:p

ROBG
2010.04.20, 09:27 PM
1/16 Slash @ MHS

http://www.youtube.com/watch?v=vdQRIT5QgT4

nice filming Koopal, i wonder who that amazing driver was, what a gifted racer:D

Slubben
2010.04.21, 05:51 AM
Great video!! It really shows the amount of area we have for track space.

Davey G
2010.04.21, 08:13 AM
Gifted driving for sure!!! Zit friday yet?

JuniorWKR
2010.04.21, 08:37 AM
cant wait till the rails and clay go down... and caint wait to hit that huge tabletop in front of the window... ;):D

Slubben
2010.04.21, 08:43 AM
I'm crossing my fingers that my Slash comes in today!

JuniorWKR
2010.04.21, 09:04 AM
Heres a little something for you to look at while you wait for yours... hahaa...

http://mini-zracer.com/forums/attachment.php?attachmentid=29679&stc=1&d=1271858646

Slubben
2010.04.21, 09:11 AM
Dude you gotta go 2.4 with that! It's not 1995 that antenna is so B-Main.

JuniorWKR
2010.04.21, 09:12 AM
1/16 Slash @ MHS

http://www.youtube.com/watch?v=vdQRIT5QgT4

the cool thing about this video is that the slash is bone stock brushed 4x4 out of the box... the only upgrade he did was 2.4.... it just goes to show that with with a little tuning of the suspension and gearing to your liking everyone can compete at a great level of competition for a entry level cost... i worked on mine a ton and have tuned the suspension and the camber along with the gearing and i can honestly say it handles like a mini-z out there... big fun in a small package.... the size of the track and the size of the truck are perfect....

the overal track dimensions are 35x50.... through in a huge tabletop in front of the window with tons of berms and woops and some technical sections and the entire setup feels like big league racing... cant wait to we get it all completed and start tearing it up on sundays...

ROBG
2010.04.21, 09:29 AM
Dude you gotta go 2.4 with that! It's not 1995 that antenna is so B-Main.

lol, yeah that's definetly not your style.:cool:

JuniorWKR
2010.04.21, 09:31 AM
just waiting for my module to come in for my KO... but not that it makes a difference... its not like you guys are gonna be passing me anytime soon... :eek:... hahaa... Slash - AM = Slash - A-Main....

ROBG
2010.04.21, 12:21 PM
just waiting for my module to come in for my KO... but not that it makes a difference... its not like you guys are gonna be passing me anytime soon... :eek:... hahaa... Slash - AM = Slash - A-Main....

i don't know that long antenna can get caught on anything maybe even somehing slow like Sean's SC18.:D

JuniorWKR
2010.04.21, 12:22 PM
hahahahahaha.... what do you mean?... that truck was the buy of the century.... just ask Jimmy.... hahahahahahaha

ROBG
2010.04.21, 12:24 PM
hahahahahaha.... what do you mean?... that truck was the buy of the century.... just ask Jimmy.... hahahahahahaha

oh God now we have to watch our backs, lol:D

Slubben
2010.04.21, 12:53 PM
My SC18 maybe a lot of things but slow it's not! :mad:

Slubben
2010.04.21, 12:55 PM
oh God now we have to watch our backs, lol:D

Goldfarb: Why are they laughing at you??? :)

Jimmy: Cause my niece is in the car. :mad::mad::mad::mad::mad::mad:

LOL!!!!

ruf993
2010.04.21, 12:55 PM
1/16 Slash @ MHS

http://www.youtube.com/watch?v=vdQRIT5QgT4

This is sick... where is this. i"m all in...:p

ROBG
2010.04.21, 01:16 PM
Goldfarb: Why are they laughing at you??? :)

Jimmy: Cause my niece is in the car. :mad::mad::mad::mad::mad::mad:

LOL!!!!

lol oh my God know your on the kill list, we all better watch out now, lol

Slubben
2010.04.21, 01:18 PM
Like he can get on the frigging Internet!

ROBG
2010.04.21, 01:22 PM
Like he can get on the frigging Internet!

aaaaaaaawwwwww poor guy. man we are having so much fun today, i hope the weather holds out:rolleyes:

Slubben
2010.04.21, 01:29 PM
It should. Still looks nice out!

JuniorWKR
2010.04.21, 09:23 PM
if anyone is interested we will be running at the shop tomorrow on the outside track... i know maj has about 6 - 8 slashes comming in and i thinka they are all about gone already... we should have in the neighbor hood of 12 guys running tomoorow so bring anything you got in the 18 to 16 scale or come pick up a new mini slash and have some fun... see ya all after work tomorrow...

Davey G
2010.04.22, 01:22 PM
Just to branch out to a different group of people we are also talking about the offroad track here:

http://www.voodoorc.com/forum/information/clubs-or-tracks/new-jersey-118th-scale-offroad-track

JuniorWKR
2010.04.22, 02:05 PM
who is ready to tear up some friggin dirt today!!!!!!!!!!!!!!!!!!!!

ROBG
2010.04.22, 02:07 PM
who is ready to tear up some friggin dirt today!!!!!!!!!!!!!!!!!!!!

i am, it might rain a little, but it's going to pass. so don't let a little rain detur you from stopping by guy's.

Slubben
2010.04.22, 02:11 PM
Oh I'm stopping by for sure. I am really excited about getting my Slash. If it rains I will work on it till it stops. Its light out til almost 8 and there's no way it's gonna rain for 3 hours!

Junior did you install the center diff yet, how is it?

JuniorWKR
2010.04.22, 02:19 PM
its amazing... you cant get it to break loose... all the power goes to where its supposed to know... im very impressed for how good it is considering its only a center diff and it doesnt come with a front a rear diff ...

i was whalling this thing up and down my block last night and full friggin throttle and going lock to lock on the whell and it never lost traction nor did it ever three wheel or flip over...

but i cant wait till you ask me for help... im so gonna laugh at you for when you realize how much you screwed urself after posting that pic of me..

JuniorWKR
2010.04.22, 02:19 PM
i am, it might rain a little, but it's going to pass. so don't let a little rain detur you from stopping by guy's.

at least we wont have to water the track...

Slubben
2010.04.22, 02:27 PM
its amazing... you cant get it to break loose... all the power goes to where its supposed to know... im very impressed for how good it is considering its only a center diff and it doesnt come with a front a rear diff ...

i was whalling this thing up and down my block last night and full friggin throttle and going lock to lock on the whell and it never lost traction nor did it ever three wheel or flip over...

but i cant wait till you ask me for help... im so gonna laugh at you for when you realize how much you screwed urself after posting that pic of me..

If I remember correctly you were the one last night saying where's the helmet, take a picture, take a picture!

JuniorWKR
2010.04.22, 02:29 PM
that was for the insurance claim ;)... hahaa...

someones gonna pay for my new haircut since the flying peice of blade gave me a shape up... hahaa...

Slubben
2010.04.22, 02:44 PM
the phrase "like blood from a stone" comes to mind :)

JuniorWKR
2010.04.22, 02:48 PM
you mean like blood on a stone ;)

Slubben
2010.04.23, 12:51 PM
http://www.tamiyausa.com/product/item.php?product-id=56703

ROBG
2010.04.23, 01:03 PM
another class? vintage . . .

lilmj44
2010.04.23, 01:09 PM
so happy i got the slash!!!!!!hopefully i will be running it all day:)

lilmj44
2010.04.23, 01:12 PM
hopefully i can get the lipo today if maj has any left!!!!!!!

ROBG
2010.04.23, 01:12 PM
so happy i got the slash!!!!!!hopefully i will be running it all day:)

it's awesome!!!! now you have to get the hop ups. i just got the RC18T off of my buddy for $100 fully hooked up, so this is going to be my mod truck.:cool:

lilmj44
2010.04.23, 01:14 PM
awsome....im goin to be running a.m. unfortuantly but just for a while then i can get it off of u ROB (remote)
:eek:

lilmj44
2010.04.23, 01:17 PM
did maj do anything to the track did the dirt come yet!

ROBG
2010.04.23, 01:21 PM
awsome....im goin to be running a.m. unfortuantly but just for a while then i can get it off of u ROB (remote)
:eek:

once you get the module and receiver in we will make the switch.:)

Slubben
2010.04.23, 01:25 PM
Juniors truck doesn't seem to glitch at all and he is still running AM. We has a blast last night with them.

Slubben
2010.04.23, 01:42 PM
another class? vintage . . .

Who knows. You know me I'm just crazy.

ROBG
2010.04.23, 01:43 PM
Who knows. You know me I'm just crazy.

we all are, lol.

bermbuster
2010.04.23, 01:56 PM
Last night Rob sprinkled Gold Dust in Sean's eyes....
Poor Sean was blinded.....:cool:
We had an awesome time....
I retired 4 puffed lipos last nightwhen I got home.....:D

ROBG
2010.04.23, 02:01 PM
Last night Rob sprinkled Gold Dust in Sean's eyes....
Poor Sean was blinded.....:cool:
We had an awesome time....
I retired 4 puffed lipos last nightwhen I got home.....:D

yeah Berm it was a great time :cool: can't wait for tomorrow, i'll be sprinkling gold dust on everyone :D

Slubben
2010.04.23, 02:22 PM
My eye is still a little twitchy.

ROBG
2010.04.23, 02:31 PM
My eye is still a little twitchy.

you have to get those sports goggles:D:D

ROBG
2010.04.23, 10:27 PM
crazy idea guys, why don't we roll out carpet for the track, would it be cheaper and easier?

bermbuster
2010.04.23, 10:36 PM
hey slash-a-holics
July 10 and 11 are the Short Course Nationals at RC Madness in Enfield, CT
and they have a mini slash class....:cool:
Wouldnt it be kool to represent Majs and bring home some hardware.....:D

lilmj44
2010.04.24, 10:06 AM
im in for it!!!!!!!!!!!!IM SURE EVERYBODY ELSE IS TO

ROBG
2010.04.24, 10:09 AM
as long as the wife has nothing planned for me i'm in!!!!:eek:

lilmj44
2010.04.24, 11:15 AM
wa ttime r u goin to the tracK today ROB

koopal
2010.04.24, 03:02 PM
1/16 e revo / slash & sc10 @ MHS

http://www.youtube.com/watch?v=zW1GpCXpLLY

bermbuster
2010.04.24, 07:32 PM
Today was a blast......
At one point we had 6- 1/16 slashes running with 1 - 1/16 erevo
It was awesome......:cool:

We are using the nimh packs that come w the trucks and Im impressed w the power and run time.....

J-Milz
2010.04.24, 08:41 PM
1/16 e revo / slash & sc10 @ MHS

http://www.youtube.com/watch?v=zW1GpCXpLLY

Nice! All you need to do now is go to the local fire house and get some old hose. That way you can lay out a track. Then you can add berms and jumps!

lilmj44
2010.04.24, 09:25 PM
we have the landlord putting up a fence then we are putting down the clay then we have the pvc piping that we are goin to use to divide up the lanes and we have plexi glass going up around the track we will be racing on sunday after noon and will be pitting outside...there will be jumps tabletops and whips and banked turns so we are pretty much set for some "awesome":) out door racing!!!!!!!!!!!!!! :D:D:)

ROBG
2010.04.24, 09:30 PM
we have the landlord putting up a fence then we are putting down the clay then we have the pvc piping that we are goin to use to divide up the lanes and we have plexi glass going up around the track we will be racing on sunday after noon and will be pitting outside...there will be jumps tabletops and whips and banked turns so we are pretty much set for some "awesome":) out door racing!!!!!!!!!!!!!! :D:D:)

well said young man!!

lilmj44
2010.04.24, 09:46 PM
lol i cant wait until tomorrow now tht i have 2.4

ROBG
2010.04.24, 10:20 PM
lol i cant wait until tomorrow now tht i have 2.4

i'm stopping by but hopefully the weather holds out,

bermbuster
2010.04.25, 08:46 AM
lol i cant wait until tomorrow now tht i have 2.4

The LRP speedo will not work with 2.4 Mikey.....

bermbuster
2010.04.25, 08:48 AM
Nice! All you need to do now is go to the local fire house and get some old hose. That way you can lay out a track. Then you can add berms and jumps!

Maj will be laying down an AMB loop.....Maj has a complete AMB system
He has transponders too.....

Slubben
2010.04.25, 06:44 PM
ran my slash in the drizzle and puddles today a lot of fun these things dont quit

lilmj44
2010.04.25, 07:49 PM
yup your roght they dont!!!!!!!!!!!!

JuniorWKR
2010.04.26, 10:29 AM
how was the traction yesterday?

JuniorWKR
2010.04.26, 10:48 AM
hey slash-a-holics
July 10 and 11 are the Short Course Nationals at RC Madness in Enfield, CT
and they have a mini slash class....:cool:
Wouldnt it be kool to represent Majs and bring home some hardware.....:D

Berm... do you have more info on this... im interested in going...

Slubben
2010.04.26, 10:55 AM
I am also interested in attending this.

JuniorWKR
2010.04.26, 10:55 AM
Mini Short Course (SC18, Vendetta SC, Slash VXL)
Battery:
Vehicles May Use 6 or 7-cell NiMH Style Battery Packs or 2-Cell LiPo or LiFe Type Battery Packs.
Body:
Full fender short course inspired bodies only.
Chassis/Suspension:
Open to any and all option parts intended for the use on mini SC vehicles
Tires/Wheels:
In the spirit of Short- Course racing only Tires/Wheels Intended For Use In Short-Course Style
R/C Racing Are Allowed.


Heres the rules guys for the race at RC Madness... just the way we run it here.. so all your trucks will be setup to go...

Slubben
2010.04.26, 10:56 AM
how was the traction yesterday?

it was pretty good although I did not run the whole track because there was a large puddle on the right side which I did not want to drive through. It wasn't sloppy or muddy though.

JuniorWKR
2010.04.26, 10:57 AM
NOTE:
Other vehicles conforming to the above mentioned rules and specs may be allowed pending race director’s approval.
Other Important Rules:
Dimensions:
Vehicles must be within+/- 5mm of the factory stock dimensions
Race Format:
All qualifying races (electric and nitro) will be 5-minutes long
Electric 2wd Mains will be 6-minutes long
Electric 4wd Small Block Mains will be 6 minutes long
Electric 4wd Big Block Mains will be 10 minutes long
Nitro A-Mains will be 15-Minutes long
Nitro B-Mains will be 10 Minutes long
All other nitro mains will be 5-minutes long
All races, including qualifying and mains, will be heads up in style. Vehicles will be lined up 4-wide on the straight-a-way (this will make for 3 rows) and when the starting tone sounds the race will begin.
Bump-Ups
Once qualifying is complete 10 vehicles will be placed in each main based on their single best qualifying time. Lower mains will be raced first with the top two vehicles (first and second place) bumping up the next, higher, main. This will make for a maximum of 12 vehicles is subsequent mains.
Transponders:
While not required, the use of personal transponders is strongly suggested.

Slubben
2010.04.26, 10:57 AM
Mini Short Course (SC18, Vendetta SC, Slash VXL)
Battery:
Vehicles May Use 6 or 7-cell NiMH Style Battery Packs or 2-Cell LiPo or LiFe Type Battery Packs.
Body:
Full fender short course inspired bodies only.
Chassis/Suspension:
Open to any and all option parts intended for the use on mini SC vehicles
Tires/Wheels:
In the spirit of Short- Course racing only Tires/Wheels Intended For Use In Short-Course Style
R/C Racing Are Allowed.


Heres the rules guys for the race at RC Madness... just the way we run it here.. so all your trucks will be setup to go...

I guess you can only use one lipo pack though?

JuniorWKR
2010.04.26, 10:59 AM
July9th-11th Short Course Nats sponsored by Team Associated and R/C Driver


this is the date for the race... guess we will have to make a trip down there before hand to get setup...

JuniorWKR
2010.04.26, 10:59 AM
I guess you can only use one lipo pack though?

it says "packs"

JuniorWKR
2010.04.26, 11:01 AM
www.rcmadness.com

heres the link to there website...

JuniorWKR
2010.04.26, 11:02 AM
check out the video... thats there track..

JuniorWKR
2010.04.26, 12:57 PM
anyone stopping by the shop after work today with their slashes?

ROBG
2010.04.26, 01:25 PM
anyone stopping by the shop after work today with their slashes?

if it dry's out a bit. . .

Slubben
2010.04.26, 01:36 PM
it doesn't have to be that dry if you're not too crazy. I didnt have any issues yesterday.

ROBG
2010.04.26, 01:39 PM
it doesn't have to be that dry if you're not too crazy. I didnt have any issues yesterday.

well you know that i am that crazy :D i probably won't stop in today though.

JuniorWKR
2010.04.26, 01:45 PM
the track really should be broomed good today so that the rest of the rain will pack in the low spots good so when it dries up track conditions will be sweet...

lilmj44
2010.04.26, 02:26 PM
i will be stopping by to swep the track and do the same thing i did yesterday push off all of the big water puddles!!!!!!!

JuniorWKR
2010.04.26, 02:28 PM
before you go moving the water make sure where ever there is water you replace with dirt... the water is the low spots..

Slubben
2010.04.26, 02:37 PM
i will be stopping by to swep the track and do the same thing i did yesterday push off all of the big water puddles!!!!!!!

You're the man Mike!

ROBG
2010.04.26, 03:01 PM
You're the man Mike!

yeah Mikey, thanks for holding it down.:)

bermbuster
2010.04.26, 04:15 PM
I guess you can only use one lipo pack though?

you can put the 2 packs(7.4v) in to balance the slash....
you must run them in parallel...

Im looking forward to this race...we should do well!!! The guys at RC Madness are just as kool as us :cool:
We are also going to race Spec 1/10 Slash....:D

Slubben
2010.04.27, 09:39 AM
Anyone stopping by today?

ROBG
2010.04.27, 09:49 AM
Anyone stopping by today?

it's getting nice out right now, i wish i could. I'll be there Wednesday on.:cool:

Slubben
2010.04.27, 10:06 AM
Hey Rob, long time no see!

ROBG
2010.04.27, 10:22 AM
Hey Rob, long time no see!

i know i miss you too, Sunday was so long ago. I would go but my wife is off today so we are going out to eat.:)

JuniorWKR
2010.04.27, 11:11 AM
i know i miss you too, Sunday was so long ago. I would go but my wife is off today so we are going out to eat.:)

aaahhhhhh... spring is here and love is in the air

Slubben
2010.04.27, 11:48 AM
Yeah dude that was kinda g@y!

ROBG
2010.04.27, 12:34 PM
Yeah dude that was kinda g@y!

don't be shy Slubben, and Jr. don't be jealous.:D

Slubben
2010.04.27, 01:10 PM
Do I have to start carrying a taser?

ROBG
2010.04.27, 01:21 PM
Do I have to start carrying a taser?

just for that you won't see me until Friday nights races, then we'll see who's crying.:D

ROBG
2010.04.27, 01:22 PM
just for that you won't see me until Friday nights races, then we'll see who's crying.:D

but seriously i'll be there tomorrow on to rip these slashes around and knock your arse off the track.

ROBG
2010.04.28, 08:22 AM
Well yesterday I made an appearence for a little bit eventhough I thought I wasn't going to be able to make it. I was ripping around with Sean and Mikey, these thing are too cool. Anyone showing face today??

Slubben
2010.04.28, 08:53 AM
Yeah I am going to be there today. I need my fix. thanks to maj lending me a battery I got a little fix yesterday but, I need MORE!!! :D

ROBG
2010.04.28, 08:56 AM
Yeah I am going to be there today. I need my fix. thanks to maj lending me a battery I got a little fix yesterday but, I need MORE!!! :D

i know i have to definitly get a fan and more batteries so i don't have to stop.:D

JuniorWKR
2010.04.28, 09:07 AM
heres a body i painted myself while i wait for my JB R/C painted body to come back... i will probally run this body for practice and i will race the body he paints for me...

http://mini-zracer.com/forums/attachment.php?attachmentid=29749&stc=1&d=1272463646

Slubben
2010.04.28, 09:12 AM
heres a body i painted myself while i wait for my JB R/C painted body to come back... i will probally run this body for practice and i will race the body he paints for me...

http://mini-zracer.com/forums/attachment.php?attachmentid=29749&stc=1&d=1272463646

Great job Junior. I really like the liquid inspiration in the background.

JuniorWKR
2010.04.28, 09:12 AM
Great job Junior. I really like the liquid inspiration in the background.

its the only way to tune!!!!!!!!!!!! hahaa...

Slubben
2010.04.28, 09:33 AM
It's the only way to do a lot of things.

ROBG
2010.04.28, 10:21 AM
Slubben, i just charged another set of nimh's if you want to run them until your lipo's are done. so Jr. you running today?

Slubben
2010.04.28, 10:25 AM
I should be fine. I get out of work at 4 so I should be charged by five the latest.

JuniorWKR
2010.04.28, 10:29 AM
i will be there today after work... i have a new power plant in my slash... cant wait to see the rooster tails it throws up ;)

ROBG
2010.04.28, 10:29 AM
good deal,

ROBG
2010.04.28, 11:22 AM
i will be there today after work... i have a new power plant in my slash... cant wait to see the rooster tails it throws up ;)

that's sick, so i guess your going to get another Slash to run stock?

JuniorWKR
2010.04.28, 11:29 AM
probally... or maybe i will just throw a stock motor in it when we offically start the racing when the track is done...

im really interested in getting a big truck...

ROBG
2010.04.28, 11:37 AM
probally... or maybe i will just throw a stock motor in it when we offically start the racing when the track is done...

im really interested in getting a big truck...

that's cool. what do you mean by big truck? 1/10th scale?

JuniorWKR
2010.04.28, 11:38 AM
that's cool. what do you mean by big truck? 1/10th scale?

yeah or maybe 1/8th... i think i wann stay with the short course stadium truck theme though... i think im gonna stay with 4wd... maybe the kyosho, the hpi or traxxas

ROBG
2010.04.28, 11:50 AM
yeah or maybe 1/8th... i think i wann stay with the short course stadium truck theme though... i think im gonna stay with 4wd... maybe the kyosho, the hpi or traxxas

that's sick, who makes a 1/8th short course, also where would you run it?

JuniorWKR
2010.04.28, 11:58 AM
1/8 would be buggy or truggy... if i go 1/10th i would run probally the slash again...

theres tracks all over for big scale dirt...

JuniorWKR
2010.04.28, 11:59 AM
looks like this weekend is gonna be perfect weather for racing... fri is supposed to be amazing so a little dirt after work and some mini-z at night... and then we can do the same sat and then dirt all sun...

ROBG
2010.04.28, 12:39 PM
looks like this weekend is gonna be perfect weather for racing... fri is supposed to be amazing so a little dirt after work and some mini-z at night... and then we can do the same sat and then dirt all sun...

for sure, that sounds great. you should do the HPI Vorza sick buggy!!

Slubben
2010.04.28, 12:52 PM
If anything I would go with the Inferno VE for a Brushless buggy.

ROBG
2010.04.28, 01:30 PM
If anything I would go with the Inferno VE for a Brushless buggy.

that's a great choice too. Sean you still need to get that conversion kit for the flux. if your going to go big, go big!!!!!

Slubben
2010.04.28, 01:42 PM
I really just need to de-tun the Flux with the programmer. .LOL I don't want to go big! 1/16th scale is big enough.

ROBG
2010.04.28, 01:47 PM
I really just need to de-tun the Flux with the programmer. .LOL I don't want to go big! 1/16th scale is big enough.

lol, i hear ya the Slash is sick because we have a convient place to run them, but it's great to have something huge that you can tear up elsewhere.:D

JuniorWKR
2010.04.29, 08:44 AM
whos ready to tear up some dirt today after work?....

i put my stock motor back in so im ready to run with you guys again..

ROBG
2010.04.29, 08:52 AM
whos ready to tear up some dirt today after work?....

i put my stock motor back in so im ready to run with you guys again..

can't wait, i put the hop ups in last night and i can't wait to try it out. although it was pretty sick seeing your car rooster tail i'm glad to know that your putting the brushed motor back in. FYI to all those who haven't put oil in the shocks please do so. there is nothing in the chambers but a drop of black crude oil. after putting the 30 weight oil in i notice a great difference.

JuniorWKR
2010.04.29, 09:04 AM
i went with 40 weight and it was a great improvemnet... there was nothing in the shock from the factory... if you dont do it your running on nothing but spring...

i took my old stock motor and re broke it in... it seems to be runnning much better but i guess we will find out tonite...

ROBG
2010.04.29, 09:12 AM
i went with 40 weight and it was a great improvemnet... there was nothing in the shock from the factory... if you dont do it your running on nothing but spring...

i took my old stock motor and re broke it in... it seems to be runnning much better but i guess we will find out tonite...

oh that we will Jr., that we will . . . .:cool:

bermbuster
2010.04.29, 09:14 AM
I put AE 70w in the rear and AE 40w in the front on day 1....
Ill be down and out for a little while but I got a lot of hop ups coming....
some real stealth old skool parts.....Hopefully when Im back we will be running on a blue-groove....................:D

Slubben
2010.04.29, 09:32 AM
I will be doing the shocks today. After seeing what was inside Goldfarb's shocks It's a necessity...

ROBG
2010.04.29, 09:40 AM
I will be doing the shocks today. After seeing what was inside Goldfarb's shocks It's a necessity...

well look who decides to show up. i thought you weren't stopping by today?

Slubben
2010.04.29, 09:42 AM
Only for a few minutes...

ROBG
2010.04.29, 09:44 AM
Only for a few minutes...

that's cool, maybe i can entice you to run for a few????

JuniorWKR
2010.04.29, 09:45 AM
he will be there till closing... dont let him fool ya..

Slubben
2010.04.29, 09:48 AM
that's cool, maybe i can entice you to run for a few????

I probably won't be there when you get there.

ROBG
2010.04.29, 09:52 AM
I probably won't be there when you get there.

that's cool, looks like Jr. and I will get some extra time in and step up our game.

Slubben
2010.04.29, 10:23 AM
you two are gonna need a ladder to step it up to my level!!!

JuniorWKR
2010.04.29, 10:25 AM
dont you mean get down to... hahaa...

ROBG
2010.04.29, 10:26 AM
you two are gonna need a ladder to step it up to my level!!!

are you refering to your level of insanity? :eek:Maj is going to have to rip out those bushes so i don't keep running you into them.:D

Slubben
2010.04.29, 10:28 AM
All I remember from last night was someone remarking about how much faster my truck was than theres and how I had lapped them already..... :D

JuniorWKR
2010.04.29, 10:30 AM
must have been the cooler talking... :rolleyes:;)

lilmj44
2010.04.29, 10:32 AM
i will be at the shop today!!

lilmj44
2010.04.29, 10:36 AM
wat hop ups can there possibily be!!!!!!!!not to many right?:D

ROBG
2010.04.29, 10:38 AM
All I remember from last night was someone remarking about how much faster my truck was than theres and how I had lapped them already..... :D

that was true for the first couple laps, but after that i more then caught up unless you count cutting accross the course, lol.

ROBG
2010.04.29, 10:39 AM
wat hop ups can there possibily be!!!!!!!!not to many right?:D

i got the toe links, hex mounts, and put oil in my shocks. Mikey if you haven't put oil in them yet i have 30 weight at my station, use it!!!!!!

lilmj44
2010.04.29, 10:41 AM
i put 30 in to by assosiated

JuniorWKR
2010.04.29, 10:43 AM
wat hop ups can there possibily be!!!!!!!!not to many right?:D

there are a ton of hop ups for these trucks... drive shafts, cv's, aluminum bulkheads, aluminum hubs and the list goes on and on..

ROBG
2010.04.29, 10:44 AM
i put 30 in to by assosiated

oh yeah? what associated did you get?

lilmj44
2010.04.29, 10:44 AM
wen i go to the shop today ill ahve to see!!!!!!!!cant wait:D:cool::eek:

Slubben
2010.04.29, 10:46 AM
oh yeah? what associated did you get?

I believe he is saying he put 30 wt Associated shock oil in his shocks?

ROBG
2010.04.29, 10:47 AM
wen i go to the shop today ill ahve to see!!!!!!!!cant wait:D:cool::eek:

????? you are quite the weird one. anyways the oil is there if you need it, i suggest if you haven't opened the shocks then your in dire need of filling them up. so far all who have checked it out show that there is nothing in there but a drop of black gook.

Slubben
2010.04.29, 10:48 AM
must have been the cooler talking... :rolleyes:;)

LOL the cooler is empty someone drank it all... Not going to mention any names tho.... ;)

lilmj44
2010.04.29, 10:49 AM
yeah i opened them up!!!!!!!!!there is like nothing in there!like junior said its all on the shock!

ROBG
2010.04.29, 10:51 AM
yeah i opened them up!!!!!!!!!there is like nothing in there!like junior said its all on the shock!

exactly, all have confirmed this. it's weird because my other r/c's come filled. slash, flux, etc.

lilmj44
2010.04.29, 10:53 AM
yes!!!!!!thts right

ROBG
2010.04.29, 01:04 PM
so what other hop-ups are people getting??????????????????????????

ROBG
2010.04.29, 01:09 PM
there are a ton of hop ups for these trucks... drive shafts, cv's, aluminum bulkheads, aluminum hubs and the list goes on and on..

almost everything is upgradable . . .

JuniorWKR
2010.04.29, 01:35 PM
im thinking alum shocks, progressive rocker arms and the progress springs... should make for a much more well rounded truck..

ROBG
2010.04.29, 01:41 PM
im thinking alum shocks, progressive rocker arms and the progress springs... should make for a much more well rounded truck..

for sure, i don't feel the need to upgrade everything. i am wondering about getting a second servo though, what are your thoughts?

JuniorWKR
2010.04.29, 01:43 PM
for sure, i don't feel the need to upgrade everything. i am wondering about getting a second servo though, what are your thoughts?

im not upgrading for the fact of just upgrading, im getting parts that will make the truck perform better...

i thought about the second servo myself though i think i would just upgrade the single servo first...

ROBG
2010.04.29, 01:51 PM
im not upgrading for the fact of just upgrading, im getting parts that will make the truck perform better...

i thought about the second servo myself though i think i would just upgrade the single servo first...

yeah for sure, i'm going to wait until the track is fully complete. then i will get the upgraded servo's(2), steering assemble, shocks w/ titanium rods, drive shafts w/ cvd's and a couple other goodies for performance and durability. i want to keep certain breaking points cheap and easily fixable.

egonzalez
2010.04.29, 02:34 PM
im not upgrading for the fact of just upgrading, im getting parts that will make the truck perform better...

i thought about the second servo myself though i think i would just upgrade the single servo first...

Just what I thought..... Stock my A**SS, soon everyone will be running a pro brushless version with all the bells whistles… That’s what competition does to us RC maniacs. LOL

ROBG
2010.04.29, 02:36 PM
Just what I thought..... Stock my A**SS, soon everyone will be running a pro brushless version with all the bells whistles… That’s what competition does to us RC maniacs. LOL

no dude, we have to stay brushed, but all else if fair game. are we going to see you out there soon rippin it up?:cool:

Slubben
2010.04.29, 02:45 PM
Thankfully most brushless systems are too fast for the area we have so its nice to just have the stock motors.

egonzalez
2010.04.29, 02:48 PM
no dude, we have to stay brushed, but all else if fair game. are we going to see you out there soon rippin it up?:cool:


My nephews MiniT handles well on the track and jumps great…. I will be making some changes to improve the cars handling….. I think 1/18 scale is really the ideal size for MHS outdoor track… I might come tonight….

egonzalez
2010.04.29, 02:50 PM
Thankfully most brushless systems are too fast for the area we have so its nice to just have the stock motors.


You just need better breaks.....LOL

JuniorWKR
2010.04.29, 02:52 PM
hahaaa...

edel if you come tonite let me take a look at ur truck... i might have brand new rims and tire for it...

bermbuster
2010.04.29, 02:54 PM
Thankfully most brushless systems are too fast for the area we have so its nice to just have the stock motors.

The stock motors are great on a flat surface. We have to see what jumps
and whoops do.....

You dont need a bl w crazy KVs or low winds.....just enough to get the job done.....

the good news is the Duratrax 380 motor is pretty good as well so you do have some brushed options......

bermbuster
2010.04.29, 02:57 PM
hahaaa...

edel if you come tonite let me take a look at ur truck... i might have brand new rims and tire for it...

Edel I have a boatload of mini t hop ups....
from k racing aluminum shocks to mip cvds all bn.....

ROBG
2010.04.29, 03:24 PM
My nephews MiniT handles well on the track and jumps great…. I will be making some changes to improve the cars handling….. I think 1/18 scale is really the ideal size for MHS outdoor track… I might come tonight….

awesome, i'll see you then. yeah dude 1/18th and 1/16th is the only way to go.

bermbuster
2010.04.29, 04:02 PM
awesome, i'll see you then. yeah dude 1/18th and 1/16th is the only way to go.

I got a RC18T/B2 FT kit......cant wait to build it.....
what will i run first the truggy or the buggy.....:cool:

joey
2010.04.29, 05:23 PM
I got a RC18T/B2 FT kit......cant wait to build it.....
what will i run first the truggy or the buggy.....:cool:

truggy :D......

bermbuster
2010.04.29, 07:04 PM
Here is my first stealth component....
long can BL motor....the long can gives it a good magnetic field which equals torque....:cool:
its a 4800kv Turnigy

lilmj44
2010.04.30, 01:12 PM
i will be doing some out door today but more mini z ill be a main tonight
!!!!!!!!!!!!

machgo5go
2010.05.01, 10:14 AM
i will be doing some out door today but more mini z ill be a main tonight
!!!!!!!!!!!!
You will be BBQ batteries in today's outside temperature!

lilmj44
2010.05.01, 10:30 AM
i really hope tht just because its hot out we can still do everything tht we planed to do today dont let tht stop u guys!!!!!!!!!!!!!!

bermbuster
2010.05.02, 05:45 AM
who got sun burned yesterday???

today should be a good day for some practice........:cool:

lilmj44
2010.05.02, 08:57 AM
not me!!!!!!!!

lilmj44
2010.05.02, 08:59 AM
r u comin today george
(I have your money)

machgo5go
2010.05.02, 10:25 AM
not me!!!!!!!!
It was more like fixing than running time. Hopefully isolated Thunderstorm won't show up till late afternoon.

oopster
2010.05.02, 10:44 AM
What tyres are you lot running outdoors? We tend to run in doors on carpet and polished floors with 1/10th mini pins and rally blocks now that foams have been banned in our nationals.

bermbuster
2010.05.02, 11:34 AM
What tyres are you lot running outdoors? We tend to run in doors on carpet and polished floors with 1/10th mini pins and rally blocks now that foams have been banned in our nationals.

right now the track is in a trnsitional phase....
the surface is semi packed dirt w remnents of mulch....
the tires we are running range from stock to taper pins.....
now when the new surface goes down (packed clay)
the surface will become more like a blue groove and tire selection
will be a soft tire that can grip and make the blue groove..........:D

for the slash drivers there isnt too much for tires so you may have to soften the stockers up with some "simple green" etc.....

we all cant wait for the construction team to lay down the new clay......:D

lilmj44
2010.05.02, 11:35 AM
alot of us are running the stock tires but 1 guy is running pins

lilmj44
2010.05.02, 11:36 AM
geoege are u comin to day or frankie

bermbuster
2010.05.02, 11:51 AM
not today mikey im hurting.....
frankie is at his aunts house.....
we will be there next week definitely....
I m building a new 1/18th scale truggy for the track....:cool:

egonzalez
2010.05.02, 01:36 PM
I got a RC18T/B2 FT kit......cant wait to build it.....
what will i run first the truggy or the buggy.....:cool:

When are you going to MHS... I would like to see your RC18T/B2....I was thinging of getting one myself.

bermbuster
2010.05.02, 06:21 PM
When are you going to MHS... I would like to see your RC18T/B2....I was thinging of getting one myself.

I should have it together by this Friday....:cool:
Im really partial to AE and this platform is going to be tough to beat.....:D

lilmj44
2010.05.02, 10:48 PM
cool then ill see ya friday

Davey G
2010.05.03, 12:07 PM
For those that are lurking this thread but havent been to Majs Hobby Shop, here is the preliminary offroad track. I say preliminary because we are getting CLAY delivered and the jumps will be made out of dirt. Thanks to Junior and others for working so hard on this project!!!

http://i178.photobucket.com/albums/w277/Dgraboski/Majoutdoortrack.jpg

JuniorWKR
2010.05.03, 12:26 PM
well the fence is up in its entirty and Maj is running around like a headless chicken today picking up all the remaining stuff required to complete this track.... we have so much clay comming (12 yds) that it has to come in two truck loads.... half tomorrow and half wed... by end of the day wed the entire track will be covered in 2" of clay as our subbase... by the end of the weekend we will have the entire track completed with all the jumps and technical sections we want... at that time the track will be fully functional and ready to race... the only 3 things left that are gonna take some time will be for me to build a legitimate drivers stand that will sit 4 feet off the ground with a railing all the way around and a ramp to walk up... and Maj will have to complete the lapcounter and the exterior camera for stickam...

cant wait for this weekend...

egonzalez
2010.05.03, 12:30 PM
well the fence is up in its entirty and Maj is running around like a headless chicken today picking up all the remaining stuff required to complete this track.... we have so much clay comming (12 yds) that it has to come in two truck loads.... half tomorrow and half wed... by end of the day wed the entire track will be covered in 2" of clay as our subbase... by the end of the weekend we will have the entire track completed with all the jumps and technical sections we want... at that time the track will be fully functional and ready to race... the only 3 things left that are gonna take some time will be for me to build a legitimate drivers stand that will sit 4 feet off the ground with a railing all the way around and a ramp to walk up... and Maj will have to complete the lapcounter and the exterior camera for stickam...

cant wait for this weekend...


Nice job guys...

ROBG
2010.05.03, 01:42 PM
the track looks great and everyone came together to make this doable in a short amount of time so we can do some out door racing. Maj is really doing this up right with the same amout of detail and persision as the mini-z track. :cool:

bermbuster
2010.05.03, 02:30 PM
Holy Cow.....
I thought my pain medication had me hallucinating.....
The track looks freaking AWESOME.....

Slubben
2010.05.03, 02:52 PM
The pictures don't really do it justice. The MHS crew really put a lot of hard work into the track. Just like the indoor track is for mini-z I think the off road track will be the place to race 1 16th / 1 18th scale off road!

bermbuster
2010.05.03, 03:15 PM
The pictures don't really do it justice. The MHS crew really put a lot of hard work into the track. Just like the indoor track is for mini-z I think the off road track will be the place to race 1 16th / 1 18th scale off road!

Sean...you hit the nail on the head.....
The MHS crew along with Maj are TOP SHELF........

lilmj44
2010.05.03, 07:32 PM
i have to say we all put hard work into it but junior was the man and still is!!!!!!!and we got a race scheduled for june 6th we will be doin alot of other racing that i will start a thread for!!!!!!!

machgo5go
2010.05.03, 07:47 PM
i have to say we all put hard work into it but junior was the man and still is!!!!!!!and we got a race scheduled for june 6th we will be doin alot of other racing that i will start a thread for!!!!!!!
I can voucher for them since they all spend more time & dedication outside in the sun & dirt. They almost forgot what is a MINI-Z because only thing burn in their brain is SLASH!;)

ROBG
2010.05.03, 08:39 PM
you have to have the best of both worlds, it's too hard to be cooped up in doors when it's beautiful out. as long as we don't forget that when Friday comes it's Mini-Z time.:cool:

bermbuster
2010.05.04, 06:14 AM
you have to have the best of both worlds, it's too hard to be cooped up in doors when it's beautiful out. as long as we don't forget that when Friday comes it's Mini-Z time.:cool:

or when it rains......:D

Majs Hobbyshop is definitely the BEST of both Worlds.....:D

ruf993
2010.05.04, 10:32 AM
OK you ask I provide......

Here are some WIP pic's of the new MHS OFF-Road track...

http://i782.photobucket.com/albums/yy104/Majsrc/track1.jpg
http://i782.photobucket.com/albums/yy104/Majsrc/track2.jpg
http://i782.photobucket.com/albums/yy104/Majsrc/track3.jpg
http://i782.photobucket.com/albums/yy104/Majsrc/track4.jpg

and you can run these:
http://i782.photobucket.com/albums/yy104/Majsrc/Allucanbuyslash.jpg

Just wanted to say thanks to Jr (WKR) who had alot of input on making this happen.

And the rest of the gang:
Jimmy (Mr.Greeen)
Rob (Goldfarb racing)
Sean (GoldFish racing)
Dave (3cG)

more work to come...:D

JuniorWKR
2010.05.04, 10:40 AM
Nice... good to see my guys working hard... its amazing what you can get done from the chair in ur office ;)... a little persuasion goes a long way...

bermbuster
2010.05.04, 10:42 AM
It is LOOKING GOOD......

bermbuster
2010.05.04, 10:48 AM
Nice... good to see my guys working hard... its amazing what you can get done from the chair in ur office ;)... a little persuasion goes a long way...

now if you can teach Maj how to spell.....
Its WKR not WNR.......:D

JR your hard work and dedication shows even when your in your chair.....:cool:

Mini racing RULES at Majs...........

cant wait for this weekend..........

JuniorWKR
2010.05.04, 10:52 AM
hahaa... i didnt have the heart to tell him...

ruf993
2010.05.04, 11:06 AM
ck this out:
http://i782.photobucket.com/albums/yy104/Majsrc/track5.jpg

wow!:D

ruf993
2010.05.04, 11:08 AM
now if you can teach Maj how to spell.....
Its WKR not WNR.......:D

JR your hard work and dedication shows even when your in your chair.....:cool:

Mini racing RULES at Majs...........

cant wait for this weekend..........

ck your eyes again cuz i see K!:p

JuniorWKR
2010.05.04, 11:09 AM
look at how clean that clay is... no rocks or any garbage in it... this track is gonn abe damn near perfect racing conditions...

JuniorWKR
2010.05.04, 12:36 PM
i cant wait... we will be running on clay this weekend...

bermbuster
2010.05.04, 12:41 PM
ck the your eyes again cuz i see K!:p

must be the pain medication....:cool:

all i can say we are a lucky bunch of guys......:D

what time will the racing start on Sundays
i maybe going to the 7:30am mass...:eek:

bermbuster
2010.05.04, 12:47 PM
look at how clean that clay is... no rocks or any garbage in it... this track is gonn abe damn near perfect racing conditions...

Jr again you never cease to amaze me at how you do things......

Your middle initial is now A. for A-Main......

Im glad we play with minis cause i cant lift any real weight for a while.......

ruf993
2010.05.04, 01:40 PM
More to come tomorrow....;)

http://i782.photobucket.com/albums/yy104/Majsrc/track6.jpg

http://i782.photobucket.com/albums/yy104/Majsrc/track7.jpg

ROBG
2010.05.04, 02:12 PM
dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdi rtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirtdirt dirtdirtdirtdirtdirtdirtdirt:D

JuniorWKR
2010.05.04, 02:28 PM
anyone stopping by the shop after work today?

ROBG
2010.05.04, 02:29 PM
anyone stopping by the shop after work today?

i am, i need to put in some heavier oil in my shocks.:p

Slubben
2010.05.04, 02:32 PM
Yeah I will be there. I can't wait to get the hell of this Cr@p hole and at least enjoy some nice weather.

ROBG
2010.05.04, 02:36 PM
Yeah I will be there. I can't wait to get the hell of this Cr@p hole and at least enjoy some nice weather.

i know this is torture!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!:mad:

ruf993
2010.05.04, 02:39 PM
For all the Boys and Girls who paid for the Full year package for the MINIZ track. Will have free access for practice this year on the NEW MHS dirt track. Can I say an amen!!;)

ruf993
2010.05.04, 02:43 PM
Yeah I will be there. I can't wait to get the hell of this Cr@p hole and at least enjoy some nice weather.

why is it a crap hole!! shawni.....:p

JuniorWKR
2010.05.04, 02:44 PM
its a crap hole cause he isnt at the shop running his truck...

Slubben
2010.05.04, 02:45 PM
I mean my where a work is I cr@p hole.

Slubben
2010.05.04, 02:46 PM
its a crap hole cause he isnt at the shop running his truck...

exactly!! :d

ruf993
2010.05.04, 02:48 PM
I mean my where a work is I cr@p hole.

I hear ya....:D

egonzalez
2010.05.04, 02:52 PM
I hear ya....:D

Dirt is for sissies, Mini-Z is for real men......lol

ruf993
2010.05.04, 02:59 PM
Dirt is for sissies, Mini-Z is for real men......lol

Then why did you spent more time on that micro T last friday?? then your miniZ

bermbuster
2010.05.04, 03:01 PM
Dirt is for sissies, Mini-Z is for real men......lol

Edel why did you go there......:cool:

bermbuster
2010.05.04, 03:06 PM
For all the Boys and Girls who paid for the Full year package for the MINIZ track. Will have free access for practice this year on the NEW MHS dirt track. Can I say an amen!!;)

Maj you are Da Man.....
Just think... you now only need a pond and we can race boats......:D

ROBG
2010.05.04, 03:32 PM
well the weather looks crazy down in Carteret, i'm out of here in another 30min. how do we look up north???

egonzalez
2010.05.04, 04:12 PM
Wow.... The track looks AAA main Junior/Maj.... I might have to get my hads dirty and play in the dirt this summer... Waiting on T2/B2 Factory Team kit..

Davey G
2010.05.04, 07:15 PM
I know its a bit early, but to all the offroad guys please bring your offroad equipment on Friday. MHS will be taking pictures and videos of the offroad track and putting together a video for youtube. Of course it will be posted on the various forums as well. I will make another post on Thursday as a reminder.

JuniorWKR
2010.05.05, 09:45 AM
Just left the shop and the clay looks awesome... my guys are doing a great job... they were tamping the entire track as i left... its gonna be like running on asphault its so smooth... we have about 2 to 2.5 yds of clay left over to make the huge table top and all the othe doubles and triples, woops and berms we need... this weekend is gonna be awesome dirt racing.... as soon as my guys are done Maj is gonna do the layout he wants by marking it out with the pink string and then we will come in behind him and start throwing down the rest of the clay and laying down the piping... i cant wait...

Slubben
2010.05.05, 10:08 AM
Photos????

bermbuster
2010.05.05, 10:41 AM
Im going to sneak out and try to drive to the shop today for a little while......

JuniorWKR
2010.05.05, 11:22 AM
sounds good berm... im sure ur gonna like the clay..

machgo5go
2010.05.05, 11:39 AM
sounds good berm... im sure ur gonna like the clay..Smooth enough for Mini-Z's???:cool:

ROBG
2010.05.05, 12:34 PM
lets see some picks!!!!! we're bored as hell here at work, give us something to look forward to.:D

Slubben
2010.05.05, 12:48 PM
lets see some picks!!!!! we're bored as hell here at work, give us something to look forward to.:D

I second that!