PDA

View Full Version : PN70T in a AWD.


rajiex
2010.05.05, 11:53 AM
Does anyone know if a PN70T motor will fit in the AWD. I am using alloy motor clips and I cannot get it fit. Any help. The problem seems that the motor will not fit in the chasis.

EMU
2010.05.05, 12:45 PM
It is a difficult fit... You may have to shave down parts of the motor with a file. I could never get a good gear mesh with the 70t.

Old Crow
2010.05.05, 01:34 PM
If you get the PN fine tune motor mounts and pinions set, the one with the half sizes and in between pinion tooth count, that works too.

Action B
2010.05.05, 02:44 PM
The only motor holders that work with the PN 70 turn and all motors that I know of is the 3racing motor holders. 3racing motor holders give great gear mesh for me with the 70 turn.

Also, I have had some success with other brands by dremeling out the motor holder that goes onto the pinion side of the motor.