PDA

View Full Version : metal m03 servo gear out soon?


herman
2010.05.18, 05:12 AM
saw this on rc.p.sanda website (http://rajitensanda.blog73.fc2.com/)

http://mini-zracer.com/forums/attachment.php?attachmentid=29894&d=1274177548

good news for those who striped their gears....
are we seeing a metal servo gear for the m03 soon?

kwsmith29
2010.06.22, 08:47 AM
Has anyone heard anything more on this and when it might be avaiable...


Wade

z3zinho
2010.06.22, 09:58 AM
AFAIK its already available. It's kyosho part nr MZW417 :)

hpgod
2010.07.08, 06:50 AM
Has anyone actually seen this part in the states yet?
I just checked 2 shops and it is not stocked yet.
I just knocked the teeth of my 2nd set of gears.

mleemor60
2010.07.08, 08:47 AM
Art. Currently it is a back order part with Kyosho. It is expected soon. In the mean time reduce your wheel off sets to keep all portions of the tire inside the body at full lock. If you have to heat and pull the front fenders out just enough to cover the tire. it isn't iron clad but it helps.

kromie101
2010.07.08, 09:50 AM
thats crazy that this happens. i have not had one do this but i have 2 cars that burn fets up. i just had a 02 board put in an 03 chassie and it worked.

art,also check your end points on steering.i went back and checked all of mine after i heard this was happening.:).

hpgod
2010.07.08, 11:25 AM
Im running +1 offset on the front my ferrari f430.
I wish PN would off the lower arm mount in +2 so I can go back to -1 again.

The end points are trimed down from full travel. M8 radio endpoints 50-60%
I recently bumped them up a few points since switching to the new HFAY track 18. The last couple months running BTE/PN worlds/MB enduro all had flowing layouts so I had turned down the steering a little to reduce scrub in all the wide tuen layouts. The full offset chicane is what got them for sure. The last set had 30+ hours of track time on them. Just wish the new ones could be found. I guess I'll order another plastic set to keep in the spares bag.