PDA

View Full Version : pn mr015 alum towerbars?


herman
2010.05.20, 03:11 AM
anybody know if pn came out with mr015 alum upper and lower towerbars similar to the ones below? recently checked, but nada... would like to know the part number pls... thanks in advance...

pic below is alum upper and lower towerbars for mr02...
http://www.pnracing.us/new/product_image/309_1.jpg

EMU
2010.05.20, 10:20 AM
There is no upper/lower set desingned for the MR015 width on the MR015 chassis. You would have to use the lower tower from either the PN or Atomic MR015 width conversion for the MR02, with the JPL upper tower for the MR015. The lower tower has the same mounting points, but the upper tower mounting holes are more inset on the MR015.

The shop here has the JPL set in stock.
http://shop.tinyrc.com/product.php?productid=18111&cat=0&page=1

Skv012a
2010.05.20, 01:07 PM
There is no upper/lower set desingned for the MR015 width on the MR015 chassis. You would have to use the lower tower from either the PN or Atomic MR015 width conversion for the MR02, with the JPL upper tower for the MR015. The lower tower has the same mounting points, but the upper tower mounting holes are more inset on the MR015.

The shop here has the JPL set in stock.
http://shop.tinyrc.com/product.php?productid=18111&cat=0&page=1

Yep, that's the ONLY option right now, but it should be enough. The bottom arms have a much sturdier design than the top ones and having one set of these reinforced should be more than enough.

I only regret these coming way after I stopped using my 15 altogether.

EMU
2010.05.20, 02:19 PM
The JPL MR015 towers were around long before I produced my kit. I wanted to make sure that there was an alternative to be able to go back to the MR015 width if you needed to... Its not very cost effective, but is possible.

ruf
2010.05.20, 03:29 PM
EMU - shoot me an email. I've got a v-battery MR-015 chassis that I used with your bars if you want it. Kinda neat.

herman
2010.05.20, 09:53 PM
thanks for all your replies...

the reason why i asked was i recently got emu's widening tower bars and was wondering if there's an option to switch back between 02 and 015 trackwidths... now i guess there is an option...

herman
2010.05.20, 09:56 PM
hmm... just looked at the shop... and found this...

Atomic Mini-Z MR-015 Alloy Front and Lower Tower Bars.
http://shop.tinyrc.com/product.php?productid=19424
unfortunately it is out of stock... is this what it is? if so, i guess at one point, they did exist....

EMU
2010.05.21, 12:57 AM
Those are for the MR02. I thought the same thing when I first saw them.