PDA

View Full Version : Mini Copper S Offset?


Mini-Z#12
2010.07.22, 01:30 PM
Does anyone know what the offset for a Mini Copper S is mounted on a MR-02 chassis?

Thanks

pfcparts
2010.07.22, 07:19 PM
I don't think you can.

If I remember correctly it is 0N/0W on the 015
or the narrow setting on the 03.

You might be able to get away with -1 offset
at the front (not sure if it'd fit), but the rear
should be the same.


parts

doug01n
2010.07.23, 12:52 AM
It's 0N all over.

I use -1W at rear, and the back is planted with the DDS and dual shock... but it's too instalble at the straigts!

JuniorWKR
2010.07.23, 01:39 PM
when i used to run the cooper on my 02 i put the narrow front end on it from pn which makes it like the 015... i then ran 0 narrow fronts and +1 narrow rears... dps with soft spring on bottom and med on top and f1 shock with yellow spring and use a heavy damening grease on shock and lightweight grease on dps..