PDA

View Full Version : Radio choice


kmuracami
2010.10.29, 05:27 AM
Hello,

Could you guys tell if that is a way to bind a Spektrum DX3R on the MR03 PCB ? or if someone know how to modify it or someone do it ...

Sorry if this thread had been opened yet.

Thank you

wildthing
2010.11.07, 07:49 AM
can not be done... the 2.4Ghz of Kyosho mini Zs are not the same with other controllers (like what you have/plan to use)

J-Milz
2010.11.07, 08:22 AM
It sux, but it's a totally different system. I sold all my radio gear to get a ko Helios / JR z1. They are high end radios and are compatible with my 1/10 systems using spektrum modules. Just the nature of the mini z beast.

Eman
2010.11.07, 11:56 AM
There was someone one this forum that was converting AM to use Spektrum receivers. Wasn't too long ago I seen the thread. Found it.

http://mini-zracer.com/forums/showthread.php?t=34307

He might be able to help you.

bermbuster
2010.11.07, 04:14 PM
can not be done... the 2.4Ghz of Kyosho mini Zs are not the same with other controllers (like what you have/plan to use)

Dont say it cant be done.....
I have heard/seen people putting KO electronics in TXs and making things work.

For box stock use the Spektrum does not work with KO mini z 2.4.....

kmuracami
2010.11.08, 06:56 PM
Maybe the best thing to do is trade for a ko transmitter ... well, thank´s guys, ill see what i can do with my DX3R hehe. :D

herman
2010.11.08, 09:32 PM
here's a link to pchan0 ma010 conversion from way back 2007
click here (http://mini-zracer.com/forums/showthread.php?t=24262)

Here are the list of equipment I planned to use.

Spektrum system with micro receiver, case removed.
GFS! speed control, no brake and reverse. 1 gram, 10 amp max.
HS50 servo PCB with Kyosho sensor and servo.

then he eventually used...

Just got done installing the Xray 180 ESC, finally I have reverse and brake.

So a update of what I used,

Futaba S3154 micro digital servo
Spektrum micro receiver
Xray 180 ESC

then finally...
I can offer a building service too.

Car now equips with a Novak SPY, micro Spektrum and Futaba S3154 digital servo
http://mini-zracer.com/forums/attachment.php?attachmentid=30797&stc=1&d=1289268493

so i guess... if there's a will there's a way...

just went through the thread... was nice looking at some other conversions from all over the place...

if you do plan on doing it good luck... :D

wildthing
2010.11.09, 08:52 AM
Maybe the best thing to do is trade for a ko transmitter ... well, thank´s guys, ill see what i can do with my DX3R hehe. :D

if the DX3R have a module that can be removed (like the 4PK) or hacked, you can can probably install/adapt a kyosho mini Z module on it.

but from stock-out-of-the-box the 2.4Ghz module of DX3R speaks a different "language" that will allow it to communicate with the receivers of the 2.4Ghz mini-Zs.