PDA

View Full Version : Giro Z Help


yscheong
2010.11.09, 09:01 AM
I had purchase a Giro Z USB system but cannot make it work.

I had success install the driver in window xp, connect the system. In Z round system show connected. But just the sensor cannot detect the transponder. I had try few transponder also the same.

Any idea how to check the sensor and the giro z board whether is working or not? Or other method to test the system?

Thanks

rc168
2010.11.09, 11:56 AM
email your question to: info@technicalrp.com, you'll get the answer you want fromTRP

hrdrvr
2010.11.09, 03:05 PM
Are you sure that the transponder LED is visible to the bridge? Make sure it is placed where it can be seen through a window. You can try and run it through the counter without the body just to test if this could be the problem.

yscheong
2010.11.09, 08:42 PM
Yup, I have used the cam and the transponder led is visible. I have run with out body shell as well.