PDA

View Full Version : 599XX offsets


MXMRCR
2011.02.20, 10:15 AM
hi all, if anyone has bought a 599XX AutoScale could you please let me know the wheel offsets as i plan on buying a white body version.

thanks.

arch2b
2011.02.20, 10:26 AM
the request for offset is related to an mr-03 chassis based on where this was originally posted.

mdowney
2011.03.05, 04:39 AM
I'm running +3/+3 in my mod car but I had to use some Velcro on the chassis near the side body clips in order to push them out a bit to make clearance for the rear wheels. I think the stock offset is +2 in the rear.

ocean rodeo
2011.03.06, 12:14 PM
3mm front and rear.

Racer-HH
2011.03.07, 12:24 PM
I can confirm 3/3.

herman
2011.03.07, 08:53 PM
wow that's pretty wide...
if i'm not mistaken i think it's the widest track width...

vesahyp
2011.03.14, 03:38 AM
I've got some clearance issues with +3 rears so i'm using +2s. Up front i've got +1 but only because i don't have the right color +2s or 3s.

The ride height is really low compared to say the murcielago and it turns out i can't use it as my mod body due to the windscreen being so far behind/low that the giro-z module gets in the way of the top damper. Anyone else had similar issues?

ocean rodeo
2011.03.14, 04:11 AM
You can always pop the clips off gently and re glue them to raise the body.

lfisminiz
2011.03.14, 04:34 AM
I've got some clearance issues with +3 rears so i'm using +2s. Up front i've got +1 but only because i don't have the right color +2s or 3s.

The ride height is really low compared to say the murcielago and it turns out i can't use it as my mod body due to the windscreen being so far behind/low that the giro-z module gets in the way of the top damper. Anyone else had similar issues?

Ill have to look again but i ran it with the Giro showing out the front window.

EMU
2011.03.14, 12:32 PM
I think I had to mount the transponder sideways, but I didnt have clearance issues (I use I-Lap)....