View Full Version : ICS settings
big steve
2011.05.15, 04:20 PM
Hi guys does anyone know the kit ICS settings for a standard Mr-03 chassis and the JSCC cup chassis.:) I want to adjust the settings but I don't know the kit settings.
Thanks in advance. :)
Steve
color01
2011.05.15, 07:10 PM
I don't know about the JSCC chassis but the early MR03s' kit settings were junk. Try this for a baseline:
GAIN: Medium
SPEED: Fast
PNCH: 2
D.BAND: Narrow
DUMP: Over
D.FREQ.: 1.2kHz
NUTRAL: Mid
VINERTIA: Off
BAKTIM: 1
ST.GAIN: 250
TH.GAIN: 250
You'll get a more direct feel to the servo but it won't be twitchy, just very smooth. If you want more aggressive steering, increase the PNCH and vice versa.
reaper
2011.05.19, 04:12 PM
if you want standard just plug in your ics cable open the software and hit "reset" then "program" .....thats it back to stock config
Guystill
2011.06.26, 03:35 PM
Hi, does anyone have a fix for the ics to work on the latest windows?
reaper
2011.06.26, 04:41 PM
windows 7 ? i havent had any problems all works fine
Guystill
2011.06.27, 03:59 AM
really? i cant get the driver installed, how did you do it?
Z-inim
2011.06.27, 07:08 AM
really? i cant get the driver installed, how did you do it?
Install drivers on win7 (http://www.ftdichip.com/Support/Documents/AppNotes/AN_119_FTDI_Drivers_Installation_Guide_for_Windows 7.pdf)
Guystill
2011.06.28, 01:30 PM
thanks tho even so i cant get mycomputer to find the driver on the net or on the cd given with the cables, can you give me a copy of the driver?
Z-inim
2011.06.28, 01:52 PM
thanks tho even so i cant get mycomputer to find the driver on the net or on the cd given with the cables, can you give me a copy of the driver?
Sorry, your question made me think you had the drivers, and only wanted to know how to install them. Heres a link to get them. After going there, look on the right of the chart for "setup" on the windows line.
http://www.ftdichip.com/Drivers/VCP.htm
hope this helps...
Guystill
2011.06.28, 01:59 PM
Sorry, your question made me think you had the drivers, and only wanted to know how to install them. Heres a link to get them. After going there, look on the right of the chart for "setup" on the windows line.
hope this helps..
hi, i cant seem to find the link you suggested
Guystill
2011.06.29, 12:21 PM
hi, i ran the .exe that you can download, and it installed something onto my computer. i once again tried to install the ics and my computer still cannot find the driver, any help?
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.