PDA

View Full Version : How Do I Pair The EX-1UR Mini Z Module with the Mini Z MR-03 On Board Receiver?


Starsky5000
2011.05.31, 04:19 PM
I looked in the manual but I couldn't find anything.

Please help.

Thank You All.

yasuji
2011.05.31, 08:11 PM
I looked in the manual but I couldn't find anything.

Please help.

Thank You All.

push and hold the button on the TX and turn on the controller till the light goes off then release the TX button,then it will come back on kinda dull
then depress and hold the pairing button on the top of the 2.4 mini-z and turn on the car the red light should come on, then release the button and the red light should go off for a brief moment and come back on!
then turn off the car then turn off the radio
turn on the radio , making sure the red light on the TX comes on , then turn the car on , making sure the red light comes on s well!

bobs ur uncle!:D

Starsky5000
2011.06.06, 06:53 PM
push and hold the button on the TX and turn on the controller till the light goes off then release the TX button,then it will come back on kinda dull
then depress and hold the pairing button on the top of the 2.4 mini-z and turn on the car the red light should come on, then release the button and the red light should go off for a brief moment and come back on!
then turn off the car then turn off the radio
turn on the radio , making sure the red light on the TX comes on , then turn the car on , making sure the red light comes on s well!

bobs ur uncle!:D

Ok let understand this. Push & hold the button on the TX and while I am pushing and holding the button on the TX then turn on the controller till the light goes off then release the TX button, then it will come back on kinda dull.
Then I depress and hold the pairing button on top of the mini z and at the same time I'm depressing the button on top of the mini z I should turn on the car the red light should come on, then release the button and the red light should go off for a brief moment and come back on.

The rest I understand.