PDA

View Full Version : What gear ratio are you using for drift?


javier668
2011.07.10, 02:09 PM
Hi friends:
Im tunning my AWD, im use it 80% for drift and 20% racing against stock AWD.
Im wondering, what could be the best setup (pinion and gear) for my motor, a Kyosho X Speed AWD.
Actually im using PN aluminum 15T pinion and the stock gear 31 T, with stock diferential 50% filled Tamiya antiwear Grease, amd run pretty cool, but im new on drifting using 1:28, im drift on a TB03 Dspec 1:10.
I don know if exist a better gear ratio for drift my AWD.

Regards!

thestug
2011.07.10, 09:43 PM
Hi friends:
Im tunning my AWD, im use it 80% for drift and 20% racing against stock AWD.
Im wondering, what could be the best setup (pinion and gear) for my motor, a Kyosho X Speed AWD.
Actually im using PN aluminum 15T pinion and the stock gear 31 T, with stock diferential 50% filled Tamiya antiwear Grease, amd run pretty cool, but im new on drifting using 1:28, im drift on a TB03 Dspec 1:10.
I don know if exist a better gear ratio for drift my AWD.

Regards!

As far as drifting is concerned, I think that any gearing should work well for drifitng especially with the extra power of an X-speed. If it were my car I would just have my racing gearing in all the time.