PDA

View Full Version : Can I run a X Speed Motor for AM band on 2.4?


javier668
2011.07.22, 02:31 PM
Hi friends, im running my X speed on my AM AWD, but i will change the PCB for 2.4ASF.
My X speed runs very good, and dont know what is the real diference between X speed for Am and X speed for ASF.
I dont want use other motor, mine runs pretty cool.

Regards!

LED
2011.07.22, 05:15 PM
Sure no problem.

EMU
2011.07.22, 06:08 PM
You can run any AM spec motor on ASF with no adjustments. Some ASF safe motors will need fets to be used on AM boards. It may run a little hotter with the ASF board though, so take that in mind, since more power will be going to the motor.

javier668
2011.07.22, 07:38 PM
Thank for the replies dudes!
I'm wondering if ASF gives more power my AM X speed could runs at more speed ?

Regards!

EMU
2011.07.22, 07:42 PM
Speed, no... not unless you gear it up, but it will accelerate faster due to the fact that there are twice as many fets, so more current will go to the motor with less resistance.

javier668
2011.07.22, 09:36 PM
Ok
Thank's for the help.

Regards!