PDA

View Full Version : Fets upgrading 3 stack question


vortex
2011.09.14, 02:37 PM
Hi all,On the 03 you have 1 set of 3010 fets on the top of the board and underneath aswell, if you are looking to stack three high say for running a 33 turn motor am I right in thinking because you have a 2 stack already thinking that top and bottom fets are linked in parallel do I say put a stack of 2 on the top and single stack on the bottom to make the 3 stack ,or 2 on the bottom and 1 set on the top I hope you understand what I mean guys sorry for any confusion ie how do I apply 2x3 stack correctly on an 03 circuit board
Many thanks for any help;)

cowboysir
2011.09.14, 03:02 PM
you can place another layer on either side but I put mine on the bottom layer to avoid any chance of screws through the top cover and shorting against the top layer of fets.

pedrocamp
2011.09.14, 03:11 PM
Easier to stack on the bottom, you'll need to clearance the chassis though. Make the little slot, visible on the left side battery compartment, deeper to allow room for the second layer.

vortex
2011.09.15, 06:14 AM
That's great thanks guys, what are the in fets your all running at the mo?
Ic 75,4562? 8858 ect linear or power?

unearthed name
2011.09.15, 06:46 AM
That's great thanks guys, what are the in fets your all running at the mo?
Ic 75,4562? 8858 ect linear or power?

8858 imo. more linear. i feel 4562 punchier