PDA

View Full Version : compatibilities of two pn racing pieces.


hiro-lao
2011.09.25, 04:34 AM
Hi every one,
I've bought those two pieces:

PN RACING - Back Suspension Tri Damper System (TDS) 98mm
http://i40.servimg.com/u/f40/09/00/82/02/mr299811.jpg (http://www.servimg.com/image_preview.php?i=664&u=10008202)


PN RACING - POD hybride carbone-aluminium convertible 98-100mm
http://i40.servimg.com/u/f40/09/00/82/02/mr299910.jpg (http://www.servimg.com/image_preview.php?i=663&u=10008202)

The problem is that it's not compatible. I have already this POD, do you know another suspension (like this one, not a simple dumper) who's compatible?

Thank you guys. ;)

Felix2010
2011.09.25, 04:41 AM
This should be a simple fix.:) The compatibility issues I believe are with the lower carbon U-shaped bracket that attaches to the PN Motor Podís Damper arm, is this correct? If thatís the case (As I can see only that part is ONLY compatible with the PN V3+V4 98-102 Pod), then all you need to get is this:

PN Racing Mini-Z TDS 94mm Side Damper Carbon Plate Version 2
Part#: MR2994E In Stock (Around $5 USD).

This is the correct lower carbon damper-arm plate that has the correct screw holes & geometry for your PN Pod you already own:D

Hope this helps!

hiro-lao
2011.09.27, 02:17 AM
This should be a simple fix.:) The compatibility issues I believe are with the lower carbon U-shaped bracket that attaches to the PN Motor Podís Damper arm, is this correct? If thatís the case (As I can see only that part is ONLY compatible with the PN V3+V4 98-102 Pod), then all you need to get is this:

PN Racing Mini-Z TDS 94mm Side Damper Carbon Plate Version 2
Part#: MR2994E In Stock (Around $5 USD).

This is the correct lower carbon damper-arm plate that has the correct screw holes & geometry for your PN Pod you already own:D

Hope this helps!

Yes it's exactly that. So I search what is the piece you are talking about. Thank tou very much Felix!:)

Felix2010
2011.09.29, 12:08 AM
The part is "PN Racing Mini-Z TDS 94mm Side Damper Carbon Plate Version 2Ē .

The mini-zracer online shop here has them, hereís the link:

http://shop.tinyrc.com/search.php?mode=search&page=1

Also kenonhobby(dot)com has them, Kenon is PN Racingís Home Online-Shop website. Search ďMR2994EĒ. :D

Your welcome, always glad to help:) . Good Luck with the fix, you should be Good-To-Go once you install the 94mm Side Damper plate Ver 2 on your PN motor pod. :D

hiro-lao
2011.09.29, 12:37 AM
But I live in France, is it possible for these shops to send my piece? In fact (after conversion) they are really cheaper than our french specialized shops. ^^

PNracing
2011.09.29, 01:36 AM
But I live in France, is it possible for these shops to send my piece? In fact (after conversion) they are really cheaper than our french specialized shops. ^^

You can ask for your shop where you buy, or contact RCOrange.com they should help you solve the problem.

hiro-lao
2011.10.10, 03:51 PM
You can ask for your shop where you buy, or contact RCOrange.com they should help you solve the problem.

Exactly, I've found a solution! Carlos (rcorange seller) is very cool, thank you very much eheh :p