PDA

View Full Version : F430 wheel offsets?


referjohn
2012.01.15, 05:55 PM
Hello and Thank you all in Advance.
Putting part# MZN66 Ferrari F430 on my MR-015.
What wheel offset is used on MR-015?

color01
2012.01.15, 06:31 PM
+3.5N/+1W, since the F430 has the same offsets as the old 360 Modena. Hope that helps!

referjohn
2012.01.15, 08:18 PM
What?? Thanks for the useful INTEL... I have a O.G MR-01 360. I'll try that soon.

Thanks
John

EMU
2012.01.15, 10:35 PM
With an optional tower bar set and MR02 tie rod, you can run the same offsets as the MR02/03 wide (1N/1W). Although, going back to the narrow width will be more difficult, as you have to buy an MR02>MR015 tower bar set as well as an upper JPL MR015 tower bar.

http://shop.tinyrc.com/product.php?productid=20013&cat=0&page=1

MiniPunch
2012.01.15, 11:38 PM
I also run wide tires and rims (+1 offset) on the fronts sometimes. This will only work with the narrow front suspension setup though.

I wouldn't recommend this setup for sticky surfaces though - wide tires on the front provide a LOT of traction (too much in some instances).