PDA

View Full Version : Blaze0303;My mini-z and 1/10th goodness!


blaze0303
2012.03.29, 08:04 PM
Yokomo D-Max ;) my pride and joy 1/10th
http://i39.photobucket.com/albums/e193/blaze0303/P3284905.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P3284904.jpg

MR-015 (retired)
http://i39.photobucket.com/albums/e193/blaze0303/P3284902.jpg

MR-02EX (old config)
http://i39.photobucket.com/albums/e193/blaze0303/P3284901.jpg

Some random photos of my equipment
http://i39.photobucket.com/albums/e193/blaze0303/P3284900.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P3284896.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P3284887.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P3284881.jpg

blaze0303
2012.04.03, 07:23 AM
Current setups - The pink one is the MR-02EX with alot of R246 hop-ups. Running 102mm alum motor mount, R246 BBS motor, Kyosho ball diff, Kyosho front springs (hard), Kyosho knuckles, R246 ball bearings, R246 roll and oil shock, Kyosho carbon t-plate (hard) and a 9T pinion.

My old MR-015 was swapped into the black MR-02 chassis and has the following hop-ups. Kyosho medium front springs, Kyosho carbon t-plate (medium), Kyosho oil shock and a 9T pinion.

Both cars are using narrow Kyosho 40's in front and wide Kyosho 20's in the rear.

http://i39.photobucket.com/albums/e193/blaze0303/P4030009.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P4030055.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P4030060.jpg
http://i39.photobucket.com/albums/e193/blaze0303/P4030017.jpg

blaze0303
2012.04.03, 06:51 PM
I'm looking for feedback espcially on the pink 02 from some of the experienced guys on this forum. I run on hard carpet, so any tips on making my setup faster would be highly appciated.

imxlr8ed
2012.04.03, 11:25 PM
First off, I'd trim those motor wires back a bit, looks like they may cause some unwanted rubbing. Might want to lose the big yellow resistors too, pointless IMO.

Your cars look great though! :D

blaze0303
2012.04.04, 12:49 AM
First off, I'd trim those motor wires back a bit, looks like they may cause some unwanted rubbing. Might want to lose the big yellow resistors too, pointless IMO.

Your cars look great though! :D

Thanks a lot, I was actually thinking about ditching the resistors, and you just solidified that for me, they shall be gone tonight. If my soldering skills feel up to par i'll also shorten the wires. Thanks for the advice.

EDIT - I took your advice and it turned out great!
http://i39.photobucket.com/albums/e193/blaze0303/P4040070.jpg


http://i39.photobucket.com/albums/e193/blaze0303/P4040069.jpg


http://i39.photobucket.com/albums/e193/blaze0303/P4040068.jpg